Trivia ZoneEncyclopedia
  1. Home
  2. Space exploration
  3. Objects

Space Shuttle Solid Rocket Booster

Solid propellant rocket used to launch NASA's Space Shuttle

  • Rocket model
  • 115 facts
  • 20 sources
  • Updated
  • Summary from facts

The Space Shuttle Solid Rocket Booster was the first solid-propellant rocket used for primary propulsion on a vehicle used for human spaceflight.1 The Space Shuttle Solid Rocket Booster range safety system was activated only once, during the Space Shuttle Challenger disaster.1 The segments of each Space Shuttle solid rocket booster were fixed together with O-rings that were originally two in number and changed to three after the Challenger Disaster in 1986.1

A summary made of Space Shuttle Solid Rocket Booster's own facts, quoted as read; each sentence cites its source.

Connections

35 linked subjects · 42 links inferred · 37 named together

A link reads subject → relation → subject. Each is stated by a fact (quoted, with its source), taken from Wikidata, or worked out by the knowledge graph's reasoner from the links it was given; inferred links are marked ∴ with the rule behind them.

Space Shuttle Solid Rocket Booster and 10 of its closest connectionsScrew · part of · Space ShuttleScrew · part of · Space Shuttle ChallengerScrew · part of · Ares IAres · named after · Ares VSpace Shuttle · has part(s) · Space Shuttle ChallengerSpace Shuttle · source of · OrionSpace Shuttle · source of · Space Launch SystemSpace Shuttle · has part(s) · O-ringSpace Shuttle · named together · Vehicle Assembly BuildingSpace Shuttle · named together · Ares VSpace Shuttle Challenger · has cause · O-ringOrion · space launch vehicle · Space Launch SystemOrion · named together · Ares IOrion · named together · Ares VSpace Launch System · derived from · Ares ISpace Launch System · located in · Vehicle Assembly BuildingSpace Launch System · derived from · Ares VAres I · has part(s) · O-ringAres I · named together · Ares VScrewAresSpace ShuttleSpace Shuttle Ch…OrionSpace Launch Syst…Ares IO-ringVehicle Assembly…Ares V
Point at a subject to see how it links to Space Shuttle Solid Rocket Booster.
  • stated
  • inferred
  • named together
  • Screw Object
    • (Space Shuttle Solid Rocket Booster → has part(s) → Screw) The top nut of each hold-down stud contained two explosive charges initiated by NASA standard detonators.1
    • (Screw → part of → Space Shuttle Solid Rocket Booster) inferred: the other reading of “has part(s)” (above)
  • Ares Event
    • (Space Shuttle Solid Rocket Booster → used by → Ares) NASA initially planned to reuse the four-segment Solid Rocket Booster design and infrastructure in several Ares rockets, which would have propelled the Orion spacecraft into orbit.1
  • Space Shuttle Object
    • (Space Shuttle → powered by → Space Shuttle Solid Rocket Booster) The two Space Shuttle Solid Rocket Boosters provided 85% of the Space Shuttle's thrust at liftoff and for the first two minutes of ascent.1 and 3 more facts
    • (Space Shuttle Solid Rocket Booster → part of → Space Shuttle) The Space Shuttle's two reusable Solid Rocket Boosters were the most powerful rocket motors ever made until they were superseded by those of NASA's SLS rocket.7 and 2 more facts
    • (Space Shuttle → has part(s) → Space Shuttle Solid Rocket Booster) The Space Shuttle was composed of an orbiter launched with two reusable solid rocket boosters and a disposable external fuel tank.10
    • (Space Shuttle Solid Rocket Booster → used by → Space Shuttle Challenger) A cold-compromised joint in the right solid rocket booster failed at launch and allowed hot gases to sear a hole into the adjacent main external fuel tank.1 and 1 more fact
    • (Space Shuttle Challenger → powered by → Space Shuttle Solid Rocket Booster) The Challenger accident ended with the shuttle stack disintegrating at Mach 1.92 at 46,000 feet (14 km), after the external tank was destroyed.1
    • (Space Shuttle Solid Rocket Booster → part of → Space Shuttle Challenger) inferred: the other reading of “has part(s)”
    • (Space Shuttle Challenger → has part(s) → Space Shuttle Solid Rocket Booster) inferred: implied by “powered by” (above)
  • Orion Object
    • (Orion → derived from → Space Shuttle Solid Rocket Booster) Orion's parachute system is derived from those used on Apollo spacecraft and Space Shuttle Solid Rocket Boosters and is constructed of Nomex.11
    • (Space Shuttle Solid Rocket Booster → source of → Orion) inferred: the other reading of “derived from” (above)
    • (Orion → influenced by → Space Shuttle Solid Rocket Booster) inferred: implied by “derived from” (above)
    • (Space Launch System → derived from → Space Shuttle Solid Rocket Booster) The Space Launch System boosters, adapted from the Space Shuttle's boosters, surpassed the Space Shuttle boosters as the most powerful solid rocket motors ever flown, after the launch of Artemis 1 in 2022.1 and 2 more facts
    • (Space Shuttle Solid Rocket Booster → source of → Space Launch System) inferred: the other reading of “derived from” (above)
    • (Space Launch System → influenced by → Space Shuttle Solid Rocket Booster) inferred: implied by “derived from” (above)
  • Ares I Object
    • (Ares I → powered by → Space Shuttle Solid Rocket Booster) The Ares I design updated in 2006 featured one five-segment Solid Rocket Booster as its first stage, a booster originally developed for the Shuttle but never used.1 and 1 more fact
    • (Space Shuttle Solid Rocket Booster → part of → Ares I) inferred: the other reading of “has part(s)”
    • (Ares I → has part(s) → Space Shuttle Solid Rocket Booster) inferred: implied by “powered by” (above)
  • O-ring Object
    • (O-ring → part of → Space Shuttle Solid Rocket Booster) Test data since 1977 had demonstrated a potentially catastrophic flaw in the O-rings of the Solid Rocket Boosters, but neither NASA nor manufacturer Morton Thiokol had addressed this known defect.5 and 1 more fact
    • (Space Shuttle Solid Rocket Booster → has part(s) → O-ring) The segments of each Space Shuttle solid rocket booster were fixed together with O-rings that were originally two in number and changed to three after the Challenger Disaster in 1986.1
    • (Space Shuttle Solid Rocket Booster → location of creation → Vehicle Assembly Building) The rocket motors of the Solid Rocket Boosters were joined in the Vehicle Assembly Building at KSC.3
  • Ares V Object
    • (Ares V → derived from → Space Shuttle Solid Rocket Booster) The Ares V's solid rocket booster was first envisioned as an improved version of the Space Shuttle Solid Rocket Booster, with five or five and a half segments instead of four.12
    • (Space Shuttle Solid Rocket Booster → source of → Ares V) inferred: the other reading of “derived from” (above)
    • (Ares V → influenced by → Space Shuttle Solid Rocket Booster) inferred: implied by “derived from” (above)
    • (Space Shuttle Solid Rocket Booster → recovered by → Space Shuttle orbiter) The Space Shuttle recovered and reused its solid rocket boosters, the orbiter and the RS-25 engines, but not its external fuel tank.13
    • (Space Shuttle Solid Rocket Booster → part of → Space Shuttle orbiter) inferred: through Orbital Maneuvering System, as “part of” carries over; stated: Two Orbital Maneuvering System thrusters were mounted in two separate removable pods on the orbiter's aft fuselage.9
    • (Space Shuttle orbiter → has part(s) → Space Shuttle Solid Rocket Booster) inferred: the other reading of “part of”
  • Atlantic Ocean Place
    • (Space Shuttle Solid Rocket Booster → located in → Atlantic Ocean) The Artemis II boosters splashed down in the Atlantic Ocean about six minutes after launch.6
Show 23 more connections
  • Florida Place
    • (Space Shuttle Solid Rocket Booster → located in → Florida) The Space Shuttle solid rocket boosters' water impact range is approximately 130 nautical miles (240 km) off the eastern coast of Florida.1
  • Utah Place
    • (Space Shuttle Solid Rocket Booster → located in → Utah) The Solid Rocket Boosters arrived in segments by rail car from their manufacturing facility in Utah.8
  • STS-6 Concept
    • (Space Shuttle Solid Rocket Booster → used by → STS-6) STS-6 and STS-7 used Solid Rocket Boosters that were 2,300 kg (5,000 lb) lighter, but these walls were determined to be too thin to fly safely.3
  • Auxiliary power unit Object
    • (Auxiliary power unit → part of → Space Shuttle Solid Rocket Booster) The auxiliary power units of the Space Shuttle Solid Rocket Booster were fueled by hydrazine.1 and 2 more facts
    • (Space Shuttle Solid Rocket Booster → has part(s) → Auxiliary power unit) inferred: the other reading of “part of” (above)
  • Drogue parachute Concept
    • (Drogue parachute → part of → Space Shuttle Solid Rocket Booster) The drogue parachute of a Space Shuttle solid rocket booster is 54 ft (16 m) in diameter.1
    • (Space Shuttle Solid Rocket Booster → has part(s) → Drogue parachute) inferred: the other reading of “part of” (above)
  • Hydraulic pump Concept
    • (Hydraulic pump → part of → Space Shuttle Solid Rocket Booster) The Space Shuttle Solid Rocket Booster's hydraulic pump produced hydraulic pressure of 3,050 ± 50 psi while running at 3,600 rpm.1
    • (Space Shuttle Solid Rocket Booster → has part(s) → Hydraulic pump) inferred: the other reading of “part of” (above)
  • Relief valve Concept
    • (Relief valve → part of → Space Shuttle Solid Rocket Booster) A high pressure relief valve on the Space Shuttle Solid Rocket Booster relieved overpressure at 3,750 psi (25.9 MPa).1
    • (Space Shuttle Solid Rocket Booster → has part(s) → Relief valve) inferred: the other reading of “part of” (above)
  • High-strength low-alloy steel Concept
    • (Space Shuttle Solid Rocket Booster → made from material → High-strength low-alloy steel) Each Space Shuttle Solid Rocket Booster segment case was made of 2-cm-thick D6AC high-strength low-alloy steel.1
    • (Space Shuttle Solid Rocket Booster → has part(s) → High-strength low-alloy steel) inferred: implied by “made from material” (above)
    • (High-strength low-alloy steel → part of → Space Shuttle Solid Rocket Booster) inferred: the other reading of “has part(s)”
  • Pyrotechnic fastener Concept
    • (Space Shuttle Solid Rocket Booster → has part(s) → Pyrotechnic fastener) At T−0, separation of the four explosive bolts on each Space Shuttle Solid Rocket Booster is initiated.1
    • (Pyrotechnic fastener → part of → Space Shuttle Solid Rocket Booster) inferred: the other reading of “has part(s)” (above)
  • Ammonium perchlorate composite propellant Object
    • (Space Shuttle Solid Rocket Booster → powered by → Ammonium perchlorate composite propellant) The Space Shuttle's Solid Rocket Boosters were fueled by a combination of PBAN and APCP.7
    • (Space Shuttle Solid Rocket Booster → has part(s) → Ammonium perchlorate composite propellant) inferred: implied by “powered by” (above)
    • (Ammonium perchlorate composite propellant → part of → Space Shuttle Solid Rocket Booster) inferred: the other reading of “has part(s)”
  • Polybutadiene acrylonitrile Object
    • (Space Shuttle Solid Rocket Booster → powered by → Polybutadiene acrylonitrile) The Space Shuttle's Solid Rocket Boosters were fueled by a combination of PBAN and APCP.7
    • (Space Shuttle Solid Rocket Booster → has part(s) → Polybutadiene acrylonitrile) inferred: implied by “powered by” (above)
    • (Polybutadiene acrylonitrile → part of → Space Shuttle Solid Rocket Booster) inferred: the other reading of “has part(s)”
  • MV Freedom Star Object
    • (Space Shuttle Solid Rocket Booster → recovered by → MV Freedom Star) The Solid Rocket Boosters were recovered from the ocean by the crews aboard the ships MV Freedom Star and MV Liberty Star.3
  • MV Liberty Star Object
    • (Space Shuttle Solid Rocket Booster → recovered by → MV Liberty Star) The Solid Rocket Boosters were recovered from the ocean by the crews aboard the ships MV Freedom Star and MV Liberty Star.3
  • Booster separation motor Object
    • (Space Shuttle Solid Rocket Booster → has part(s) → Booster separation motor) Each end of each solid rocket booster carries four booster separation motors.1
    • (Booster separation motor → part of → Space Shuttle Solid Rocket Booster) inferred: the other reading of “has part(s)” (above)
  • NASA recovery ship Object
    • (Space Shuttle Solid Rocket Booster → recovered by → NASA recovery ship) Specially fitted NASA recovery ships, the MV Freedom Star and the MV Liberty Star, recover the Space Shuttle solid rocket boosters.1
  • Redesigned Solid Rocket Motor Concept
    • (Space Shuttle Solid Rocket Booster → derived from → Redesigned Solid Rocket Motor) A redesign of the solid rocket booster aft skirt added reinforcement brackets and fittings, adding approximately 450 lb (200 kg) to each booster's weight together with the attach ring change.1
    • (Space Shuttle Solid Rocket Booster → influenced by → Redesigned Solid Rocket Motor) inferred: implied by “derived from” (above)
    • (Redesigned Solid Rocket Motor → source of → Space Shuttle Solid Rocket Booster) inferred: the other reading of “derived from” (above)
    • (Space Shuttle Solid Rocket Booster → country of origin → United States) from Wikidata
    • (Space Shuttle Solid Rocket Booster → city → United States) inferred: implied by “country of origin” (from Wikidata)
    • (Space Shuttle Solid Rocket Booster → country → United States) inferred: implied by “country of origin” (from Wikidata)
    • (Space Shuttle Solid Rocket Booster → location → United States) inferred: implied by “country of origin” (from Wikidata)
  • Artemis program Concept
    • (Space Shuttle Solid Rocket Booster → part of → Artemis program) inferred: the other reading of “has part(s)”
    • (Artemis program → has part(s) → Space Shuttle Solid Rocket Booster) inferred: the other reading of “part of”
  • Hydrazine Concept
    • (Space Shuttle Solid Rocket Booster → has part(s) → Hydrazine) inferred: the other reading of “part of”
    • (Hydrazine → part of → Space Shuttle Solid Rocket Booster) inferred: through Auxiliary power unit, as “part of” carries over; stated: The auxiliary power units of the Space Shuttle Solid Rocket Booster were fueled by hydrazine.1
    • (Space Shuttle Solid Rocket Booster → part of → Human spaceflight) inferred: the other reading of “has part(s)”
    • (Human spaceflight → has part(s) → Space Shuttle Solid Rocket Booster) inferred: the other reading of “part of”
    • (Space Shuttle Solid Rocket Booster → part of → Constellation program) inferred: the other reading of “has part(s)”
    • (Constellation program → has part(s) → Space Shuttle Solid Rocket Booster) inferred: through Ares I, as “has part(s)” carries over; stated: The Constellation program, including Ares V and Ares I, was canceled in October 2010 by the NASA Authorization Act of 2010.12
    • (Space Shuttle Solid Rocket Booster → part of → Space Shuttle program) inferred: the other reading of “has part(s)”
    • (Space Shuttle program → has part(s) → Space Shuttle Solid Rocket Booster) inferred: the other reading of “part of”
  • Orbital Maneuvering System Object
    • (Space Shuttle Solid Rocket Booster → part of → Orbital Maneuvering System) inferred: the other reading of “has part(s)”
    • (Orbital Maneuvering System → has part(s) → Space Shuttle Solid Rocket Booster) inferred: the other reading of “part of”

Named together

Subjects that share a fact with Space Shuttle Solid Rocket Booster, with no typed link between them yet.

    • Unlike the Solid Rocket Boosters, the Space Shuttle external tanks were not re-used.14
  • NASA 4 shared facts
    • NASA retrieval teams recovered the solid rocket boosters and returned them to the Kennedy Space Center, where their components were reused on future flights.4
  • Kennedy Space Center 4 shared facts
    • NASA retrieval teams recovered the solid rocket boosters and returned them to the Kennedy Space Center, where their components were reused on future flights.4
    • The segments of each Space Shuttle solid rocket booster were fixed together with O-rings that were originally two in number and changed to three after the Challenger Disaster in 1986.1
  • RS-25 4 shared facts
    • In the White FCR, BOOSTER was responsible for the Space Shuttle Solid Rocket Boosters and the RS-25 engines during ascent.2
  • Artemis II 3 shared facts
    • The solid rocket boosters provided the majority of thrust during the first two minutes of Artemis II's flight.6
  • Mobile launcher platform 3 shared facts
    • Each Space Shuttle solid rocket booster was attached to the mobile launcher platform at its aft skirt by four holddown studs with frangible nuts that were severed at liftoff.1
  • California 1 shared fact
    • Filament-wound case boosters for the Space Shuttle were designed to be lighter than the steel cases used on boosters launched from Kennedy Space Center, to provide the performance needed to launch polar-orbiting shuttles from the SLC-6 launch pad at Vandenberg Air Force Base in California.1
  • Aluminium 1 shared fact
    • The primary propellants of the Space Shuttle solid rocket booster were ammonium perchlorate as the oxidizer, with aluminum powder and PBAN as fuel.1
    • A five-segment solid rocket booster would have allowed the Space Shuttle to carry an additional 20,000 lb (9,100 kg) of payload in an International Space Station-inclination orbit.1
  • Lockheed Martin 1 shared fact
    • During Project Gemini, the BOOSTER position was handled by both an engineer from Martin Marietta and an astronaut.2
  • Project Gemini 1 shared fact
    • During Project Gemini, the BOOSTER position was handled by both an engineer from Martin Marietta and an astronaut.2
  • Eileen Collins 1 shared fact
    • Eileen Collins visited the Thiokol factory in Brigham City, Utah, where the solid rocket boosters were made.15
    • Filament-wound case boosters for the Space Shuttle were designed to be lighter than the steel cases used on boosters launched from Kennedy Space Center, to provide the performance needed to launch polar-orbiting shuttles from the SLC-6 launch pad at Vandenberg Air Force Base in California.1
  • Shannon Lucid 1 shared fact
    • Shannon Lucid's Mir stay was extended by six weeks due to issues with Space Shuttle Solid Rocket Boosters.16
  • Space Shuttle Enterprise 1 shared fact
    • During the Mated Vertical Ground Vibration Test, Enterprise was mated to an empty External Tank and dummy Solid Rocket Boosters, creating a boilerplate version of the complete Space Shuttle stack for the first time.17

Also named with Space Shuttle Solid Rocket Booster: STS-135, STS-51-L, STS-26, Rocketdyne F-1, Thiokol, White FCR, Direct current, Ammonium perchlorate, STS-4, STS-8, Alliant Techsystems, Vandenberg Space Launch Complex 6, California Science Center, Filament winding, Pyrotechnic initiator, Saturn-Shuttle, Space Shuttle abort modes, Launch Processing System, Frangible nut, NASA standard detonator, Hydraulic Power Units.

Space Shuttle Solid Rocket Booster: facts

115 facts in 8 categories · rated most surprising

What it is (2 facts)

  • The propellant in the Space Shuttle Solid Rocket Booster is commonly referred to as ammonium perchlorate composite propellant (APCP).1
  • The redesigned solid rocket booster was called the Redesigned Solid Rocket Motor (RSRM).1

Making and creation (6 facts)

  • The segments of each Space Shuttle solid rocket booster were fixed together with O-rings that were originally two in number and changed to three after the Challenger Disaster in 1986.1
  • During Project Gemini, the BOOSTER position was handled by both an engineer from Martin Marietta and an astronaut.2
  • The boosters were composed of seven individually manufactured steel segments that were assembled in pairs by the manufacturer and shipped by rail to Kennedy Space Center.1
  • Aluminum was chosen as a Space Shuttle Solid Rocket Booster propellant due to its high volumetric energy density and its resilience to accidental ignition.1
  • Divers place a Diver Operated Plug into the nozzle of a Space Shuttle solid rocket booster to plug it and drain the water from the motor case.1
  • The rocket motors of the Solid Rocket Boosters were joined in the Vehicle Assembly Building at KSC.3

Events (19 facts)

  • The Space Shuttle Solid Rocket Booster range safety system was activated only once, during the Space Shuttle Challenger disaster.1
  • A cold-compromised joint in the right solid rocket booster failed at launch and allowed hot gases to sear a hole into the adjacent main external fuel tank.1
  • After the Challenger disaster, caused by an O-ring failing at low temperature, the Solid Rocket Boosters were redesigned to provide a constant seal regardless of ambient temperature.3
  • NASA retrieval teams recovered the solid rocket boosters and returned them to the Kennedy Space Center, where their components were reused on future flights.4
  • At T−0, the two Space Shuttle Solid Rocket Boosters are ignited under command of the four onboard computers.1
  • The solid rocket boosters are jettisoned from the Space Shuttle at an altitude of about 146,000 ft (45 km).1
  • The solid rocket boosters separate from the external tank within 30 milliseconds of the ordnance firing command.1
  • Without the hold-down bolts, the main engines would violently tip the flight stack over onto the external tank.1
11 more facts in events
  • The range safety system was activated 37 seconds after the breakup of the Space Shuttle Challenger, when the boosters were in uncontrolled flight.1
  • In September 2009, a five-segment Space Shuttle solid rocket booster (DM-1) was static fired on the ground in ATK's desert testing area in Utah.1
  • As of 2016, none of the proposals to reuse the Space Shuttle solid rocket booster design progressed to regular flights before being cancelled.1
  • The Solid Rocket Boosters were recovered from the ocean by the crews aboard the ships MV Freedom Star and MV Liberty Star.3
  • The solid rocket boosters fell into the Atlantic Ocean under a parachute after separating from the external tank.4
  • Hot pressurized gas leaked through the Solid Rocket Booster joint and burned through the external propellant tank, which was the first crack in the Challenger chain of events.5
  • The solid rocket motor ignition commands are issued when the three Space Shuttle Main Engines are at or above 90% of rated thrust, no SSME failure is indicated, and there are no holds from the Launch Processing System.1
  • At T−0, separation of the four explosive bolts on each Space Shuttle Solid Rocket Booster is initiated.1
  • The explosive hold-down bolts are blown to release the Space Shuttle stack for liftoff once the solid rocket boosters reach full thrust.1
  • The Artemis II boosters splashed down in the Atlantic Ocean about six minutes after launch.6
  • The Solid Rocket Boosters were jettisoned approximately two minutes after launch at an altitude of approximately 46 km (150,000 ft).3

Places (2 facts)

  • The Space Shuttle solid rocket boosters' water impact range is approximately 130 nautical miles (240 km) off the eastern coast of Florida.1
  • Retrieval vessels tow the recovered Space Shuttle solid rocket boosters back to Kennedy Space Center.1

By the numbers (8 facts)

  • Each Space Shuttle Solid Rocket Booster provided a maximum thrust of 14.7 MN (3,300,000 lbf), roughly double the most powerful single-combustion chamber liquid-propellant rocket engine ever flown, the Rocketdyne F-1.1
  • The main parachutes of each Space Shuttle solid rocket booster are 136 ft (41 m) in diameter, making them the largest parachutes ever used in both deployed size and load weight.1
  • The combined mass of the two Space Shuttle Solid Rocket Boosters was about 1,180 metric tons, over half the mass of the Shuttle stack at liftoff.1
  • The two solid rocket boosters constituted about 69% of the total lift-off mass of the Space Shuttle.1
  • The Space Shuttle Solid Rocket Booster motors had a specific impulse of 242 seconds at sea level.1
  • The Space Shuttle Solid Rocket Booster motors had a specific impulse of 268 seconds in a vacuum.1
  • A five-segment solid rocket booster would have allowed the Space Shuttle to carry an additional 20,000 lb (9,100 kg) of payload in an International Space Station-inclination orbit.1
  • Each two reusable Solid Rocket Boosters had a liftoff thrust of 2,800,000 pounds-force (12 MN), which soon increased to 3,300,000 pounds-force (15 MN) per booster.7

Details and parts (76 facts)

  • The Space Shuttle Solid Rocket Booster was the first solid-propellant rocket used for primary propulsion on a vehicle used for human spaceflight.1
  • The Space Shuttle solid rocket boosters were the largest solid-propellant motors ever flown until 2022.1
  • The Space Shuttle solid rocket boosters were the first solid-propellant rockets designed for reuse.1
  • Each Space Shuttle Solid Rocket Booster's electrical power system was supplied with orbiter main DC bus power through SRB buses labeled A, B and C, which allowed all SRB buses to stay powered if one orbiter main bus failed.1
  • The Space Shuttle Solid Rocket Booster propellant had an 11-pointed star-shaped perforation in its forward motor segment.1
  • The Space Shuttle Solid Rocket Booster thrust was reduced by approximately a third 50 seconds after lift-off to avoid overstressing the vehicle during maximum dynamic pressure.1
  • The range safety system's two SRB distributors are cross-strapped, so an arm or destruct signal received by one booster is also sent to the other.1
  • Air trapped in the burned-out motor casing makes a Space Shuttle solid rocket booster float with its forward end about 30 feet (9 m) out of the water.1
68 more facts in details and parts
  • The Space Shuttle solid rocket booster's rubber O-rings were not resilient at low temperatures like the 36 °F (2.2 °C) of the morning of the January 1986 Challenger accident.1
  • The filament-wound case boosters used a double tang joint design but used two O-ring seals, unlike the regular boosters whose field joint design contributed to the Challenger Disaster in 1986.1
  • The Solid Rocket Boosters were the largest solid-propellant motors ever flown.3
  • In the White FCR, BOOSTER was responsible for the Space Shuttle Solid Rocket Boosters and the RS-25 engines during ascent.2
  • The two Space Shuttle Solid Rocket Boosters provided 85% of the Space Shuttle's thrust at liftoff and for the first two minutes of ascent.1
  • After burnout, the Space Shuttle Solid Rocket Boosters were jettisoned, parachuted into the Atlantic Ocean, recovered, examined, refurbished, and reused.1
  • Over 5,000 parts were refurbished for reuse after each Space Shuttle Solid Rocket Booster flight.1
  • Each Space Shuttle solid rocket booster had a liftoff thrust of approximately 12 meganewtons at sea level, increasing shortly after liftoff to 14.7 MN.1
  • The primary propellants of the Space Shuttle solid rocket booster were ammonium perchlorate as the oxidizer, with aluminum powder and PBAN as fuel.1
  • Each Space Shuttle solid rocket booster was attached to the mobile launcher platform at its aft skirt by four holddown studs with frangible nuts that were severed at liftoff.1
  • The solid rocket boosters committed the shuttle to liftoff and ascent without the possibility of launch abort until both motors had fully consumed their propellants and been jettisoned.1
  • The top nut of each hold-down stud contained two explosive charges initiated by NASA standard detonators.1
  • After release, the hold-down stud was stopped by a stud deceleration stand that contained sand.1
  • The rate gyro assemblies on the Space Shuttle Solid Rocket Booster were designed for 20 missions.1
  • The Space Shuttle Solid Rocket Booster propellant mixture was 69.8% ammonium perchlorate by weight, acting as the oxidizer.1
  • Each range safety system received two command messages, arm and fire, transmitted from the ground station.1
  • The nozzle of a Space Shuttle solid rocket booster lands first in the water because the parachutes provide for a nozzle-first impact.1
  • The main parachutes of a Space Shuttle solid rocket booster were formerly released at impact by a parachute release nut ordnance system, but the current design keeps them attached during water impact.1
  • Salt Water Activated Release devices are incorporated into the main chute riser lines of the Space Shuttle solid rocket booster to simplify recovery efforts and reduce damage to the booster.1
  • The Challenger SRB field joint design was flawed, with joint flexure during launch compromising the seal of the large rubber O-rings.1
  • After the Challenger accident, the attachment ring on the solid rocket booster was redesigned to encircle the motor case completely (360°), up from a 'C' shape that encircled it only 270°.1
  • A redesign of the solid rocket booster aft skirt added reinforcement brackets and fittings, adding approximately 450 lb (200 kg) to each booster's weight together with the attach ring change.1
  • Filament-wound case boosters for the Space Shuttle were designed to be lighter than the steel cases used on boosters launched from Kennedy Space Center, to provide the performance needed to launch polar-orbiting shuttles from the SLC-6 launch pad at Vandenberg Air Force Base in California.1
  • After the closure of SLC-6, the filament-wound case boosters were scrapped by ATK and NASA, but their field joints were later incorporated into the field joints of the boosters used until the last flight in 2011.1
  • A five-segment solid rocket booster would have eliminated the Return-to-Launch Site and Trans-Oceanic Abort modes of the Space Shuttle.1
  • The solid rocket boosters ignited at T-0 after the core stage's RS-25 engines were confirmed at full power, and their ignition could not be reversed.6
  • The Space Shuttle's two reusable Solid Rocket Boosters were the most powerful rocket motors ever made until they were superseded by those of NASA's SLS rocket.7
  • The Space Shuttle's Solid Rocket Boosters provided 71.4% of the Space Shuttle's thrust during liftoff and ascent.3
  • Each Solid Rocket Booster was filled with a total of 500,000 kg (1,106,640 lb) of solid rocket propellant.3
  • The Solid Rocket Boosters were the only system connected to the mobile launcher platform, providing structural support for the orbiter and external tank.3
  • Each Solid Rocket Booster provided 12,500 kN (2,800,000 lbf) of thrust, later improved to 13,300 kN (3,000,000 lbf) beginning on STS-8.3
  • Two solid rocket boosters were connected to the external tank and burned for the first two minutes of flight.4
  • The Solid Rocket Boosters used solid propellant, which is where their name comes from.8
  • The Solid Rocket Boosters arrived in segments by rail car from their manufacturing facility in Utah.8
  • The two Space Shuttle solid rocket boosters provided the main thrust to lift the shuttle off the launch pad and up to an altitude of about 150,000 ft.1
  • The Space Shuttle solid rocket boosters were ignited after the thrust level of the three RS-25 main engines was verified.1
  • Each Space Shuttle solid rocket booster weighed approximately 1,300,000 lb at launch.1
  • Each Space Shuttle Solid Rocket Booster had four hold-down posts that fit into corresponding support posts on the mobile launcher platform.1
  • The hold-down stud of the Space Shuttle Solid Rocket Booster was 28 in (710 mm) long and 3.5 in (89 mm) in diameter.1
  • The nominal operating voltage of the Space Shuttle Solid Rocket Booster electrical system was 28 ± 4 volts DC.1
  • Each Space Shuttle Solid Rocket Booster consists of two self-contained, independent Hydraulic Power Units.1
  • Each Space Shuttle Solid Rocket Booster had two hydraulic gimbal servoactuators to move its nozzle up and down and side to side.1
  • The Space Shuttle Solid Rocket Booster thrust vectoring helped control the vehicle in roll, pitch and yaw.1
  • Each Space Shuttle Solid Rocket Booster contained three rate gyro assemblies, each with one pitch and one yaw gyro.1
  • Each Space Shuttle Solid Rocket Booster segment case was made of 2-cm-thick D6AC high-strength low-alloy steel.1
  • SRB ignition can occur only when a manual lock pin from each SRB safe and arm device has been removed.1
  • The fire 2 commands cause the redundant NASA standard detonators to fire through a thin barrier seal down a flame tunnel.1
  • Each end of each solid rocket booster carries four booster separation motors.1
  • The Space Shuttle had two range safety systems, one in each Solid Rocket Booster.1
  • A range safety system provides for destruction of a rocket or part of it with on-board explosives by remote command if the rocket is out of control.1
  • The range safety system was used only when the Space Shuttle violates a launch trajectory red line.1
  • The arm command enables the onboard logic for a destruct and lights a light on the flight deck display and control panel at the commander and pilot station.1
  • The range safety system's linear-shaped charge is ignited by confined detonating fuse assemblies, which are ignited by NASA standard detonators, to destroy the booster.1
  • The safe and arm device gives mechanical isolation between the detonators and the confined detonating fuse before launch and during the booster separation sequence.1
  • The range safety system is powered down during the booster separation sequence, when the booster recovery system is powered up.1
  • The Space Shuttle solid rocket boosters are slowed by a parachute system to prevent damage on ocean impact.1
  • NASA initially planned to reuse the four-segment Solid Rocket Booster design and infrastructure in several Ares rockets, which would have propelled the Orion spacecraft into orbit.1
  • Two reusable solid rocket boosters provided additional thrust for approximately the first two minutes of launch.9
  • The solid rocket boosters provided the majority of thrust during the first two minutes of Artemis II's flight.6
  • The Artemis II boosters separated at roughly 3,100 miles per hour at an altitude of 30 miles.6
  • The Space Shuttle's Solid Rocket Boosters landed by parachute and were recovered at sea.7
  • The Space Shuttle's Solid Rocket Boosters were fueled by a combination of PBAN and APCP.7
  • The two solid rocket boosters of the Space Shuttle were recoverable and were jettisoned before the vehicle reached orbit.3
  • Each Solid Rocket Booster weighed 68,000 kg (150,000 lb).3
  • Each Solid Rocket Booster was 45 m (149.2 ft) tall.3
  • Each Solid Rocket Booster had a steel exterior approximately 13 mm (.5 in) thick.3
  • Subsequent flights until STS-26 used cases that were 0.076 mm (.003 in) thinner than the standard-weight cases, reducing weight by 1,800 kg (4,000 lb).3
  • The range safety system's battery in each booster powers system A, while the recovery battery powers system B and the booster's recovery system.1

Reception and legacy (1 fact)

  • At the time of their debut, the Space Shuttle Solid Rocket Boosters were the most powerful solid rocket motors ever flown.1

More facts (1 fact)

  • The launch processing system monitored the hold-down pyrotechnic initiator controllers for low voltage during the last 16 seconds before launch.1

Mentioned on other pages

47 facts about other subjects name Space Shuttle Solid Rocket Booster; the 24 most surprising

  • O-ring: The Rogers Commission concluded that an O-ring seal in one of Space Shuttle Challenger's solid rocket boosters failed to contain pressurized burning gas.19
  • O-ring: Test data since 1977 had demonstrated a potentially catastrophic flaw in the O-rings of the Solid Rocket Boosters, but neither NASA nor manufacturer Morton Thiokol had addressed this known defect.5
  • Space Launch System: The Space Launch System boosters, adapted from the Space Shuttle's boosters, surpassed the Space Shuttle boosters as the most powerful solid rocket motors ever flown, after the launch of Artemis 1 in 2022.1
  • STS-51-L: A Space Shuttle Solid Rocket Booster from STS-51-L was destroyed by the range safety officer during the Challenger disaster.1
  • STS-135: The final set of boosters that launched STS-135 included parts that had flown on 59 previous missions, including STS-1.1
  • California Science Center: The Space Shuttle solid rocket boosters on display at the California Science Center have parts that flew in 81 different Space Shuttle missions.1
  • Saturn-Shuttle: The Saturn-Shuttle could also have eliminated the Space Shuttle Solid Rocket Boosters that ultimately precipitated the Challenger accident in 1986.18
  • Space Shuttle orbiter: The Space Shuttle recovered and reused its solid rocket boosters, the orbiter and the RS-25 engines, but not its external fuel tank.13
  • Space Shuttle Enterprise: During the Mated Vertical Ground Vibration Test, Enterprise was mated to an empty External Tank and dummy Solid Rocket Boosters, creating a boilerplate version of the complete Space Shuttle stack for the first time.17
  • STS-6: STS-6 and STS-7 used Solid Rocket Boosters that were 2,300 kg (5,000 lb) lighter, but these walls were determined to be too thin to fly safely.3
  • Orion: Orion's parachute system is derived from those used on Apollo spacecraft and Space Shuttle Solid Rocket Boosters and is constructed of Nomex.11
  • Space Shuttle Challenger: The disaster was caused by the failure of the primary and secondary O-ring seals in a joint in the right Space Shuttle Solid Rocket Booster.5
  • O-ring: In the early 1970s, evaluations of the proposed Space Shuttle solid rocket booster design and field joint testing showed that wide tolerances between mated parts allowed the O-rings to be extruded from their seats rather than compressed.5
  • Shannon Lucid: Shannon Lucid's Mir stay was extended by six weeks due to issues with Space Shuttle Solid Rocket Boosters.16
  • Ares V: The Ares V's solid rocket booster was first envisioned as an improved version of the Space Shuttle Solid Rocket Booster, with five or five and a half segments instead of four.12
  • Space Shuttle orbiter: NASA's first orbital test flight of a complete, crewed Space Shuttle, consisting of the orbiter, an external fuel tank, and two solid rocket boosters, took place on April 12, 1981.20
  • Space Shuttle Challenger disaster: One Space Shuttle orbiter was lost during launch due to failure of a solid rocket booster seal.20
  • STS-4: A Space Shuttle Solid Rocket Booster from STS-4 was not recovered because of a parachute malfunction.1
  • Auxiliary power unit: The auxiliary power units of the Space Shuttle Solid Rocket Booster were fueled by hydrazine.1
  • Relief valve: A high pressure relief valve on the Space Shuttle Solid Rocket Booster relieved overpressure at 3,750 psi (25.9 MPa).1
  • Auxiliary power unit: The auxiliary power units and hydraulic power units of the Space Shuttle Solid Rocket Booster were reusable for 20 missions.1
  • NASA recovery ship: Specially fitted NASA recovery ships, the MV Freedom Star and the MV Liberty Star, recover the Space Shuttle solid rocket boosters.1
  • Space Shuttle Challenger: The Challenger accident ended with the shuttle stack disintegrating at Mach 1.92 at 46,000 feet (14 km), after the external tank was destroyed.1
  • NASA: Before the destruction of the Space Shuttle Columbia in 2003, NASA investigated replacing the four-segment solid rocket boosters with a five-segment design.1

Sources

20 pages the facts on this page were read from

  1. Space Shuttle Solid Rocket Booster en.wikipedia.org
  2. Christopher C. Kraft Jr. Mission Control Center en.wikipedia.org
  3. Space Shuttle en.wikipedia.org
  4. Space Shuttle Columbia disaster en.wikipedia.org
  5. Space Shuttle Challenger disaster en.wikipedia.org
  6. Artemis II en.wikipedia.org
  7. Spacecraft en.wikipedia.org
  8. Kennedy Space Center Launch Complex 39 en.wikipedia.org
  9. Space Shuttle orbiter en.wikipedia.org
  10. Space Shuttle program en.wikipedia.org
  11. Orion (spacecraft) en.wikipedia.org
  12. Ares V en.wikipedia.org
  13. Launch vehicle en.wikipedia.org
  14. Space Shuttle external tank en.wikipedia.org
  15. Eileen Collins en.wikipedia.org
  16. Shuttle–Mir program en.wikipedia.org
  17. Boilerplate (spaceflight) en.wikipedia.org
  18. Saturn V en.wikipedia.org
  19. Space Shuttle Challenger en.wikipedia.org
  20. Space Race en.wikipedia.org

Facts are short sentences the Trivia Zone knowledge graph read from these pages; Wikipedia text is available under CC BY-SA 4.0 and Wikidata under CC0. Names, classes and links come from Wikidata.