Space Shuttle external tank
Component of the Space Shuttle launch vehicle
The Space Shuttle external tank was jettisoned just over 10 seconds after main engine cut-off.1 The Space Shuttle external tank was covered in 270 kg (595 lb) of white fire-retardant latex paint on the first two missions, STS-1 and STS-2.2 The unpainted External Tank saved approximately 272 kg (600 lb) in weight and gave the tank its distinctive orange color.3
A summary made of Space Shuttle external tank's own facts, quoted as read; each sentence cites its source.
Connections
24 linked subjects · 26 links inferred · 37 named together
A link reads subject → relation → subject. Each is stated by a fact (quoted, with its source), taken from Wikidata, or worked out by the knowledge graph's reasoner from the links it was given; inferred links are marked ∴ with the rule behind them.
- stated
- inferred
- named together
- Los Angeles Place
- (Space Shuttle external tank → located in → Los Angeles) The Space Shuttle external tank ET-94 was scheduled in 2019 to be displayed with Space Shuttle Endeavour at the California Science Center when the Samuel Oschin Air and Space Center opened.1
- Space Shuttle Object
- (Space Shuttle external tank → part of → Space Shuttle) The Space Shuttle external tank was a bright orange throwaway tank from which the RS-25 engines sourced their fuel.6
- (Space Shuttle → has part(s) → Space Shuttle external tank) The Space Shuttle was composed of an orbiter launched with two reusable solid rocket boosters and a disposable external fuel tank.7
- Space Shuttle Columbia Concept
- (Space Shuttle Columbia → has part(s) → Space Shuttle external tank) The strike plate next to the forward latch of Columbia's external-tank door was melted and distorted by excess heat during reentry.3
- (Space Shuttle external tank → part of → Space Shuttle Columbia) inferred: the other reading of “has part(s)” (above)
- STS-1 Event
- (Space Shuttle external tank → used by → STS-1) The first two external tanks, used for STS-1 and STS-2, were painted white to protect them from ultraviolet light during the extended time the shuttle spent on the launch pad.1
- RS-25 Object
- (RS-25 → powered by → Space Shuttle external tank) During lift-off and ascent, the Space Shuttle external tank supplied fuel and oxidizer under pressure to the three RS-25 main engines in the orbiter.1
- (Space Shuttle external tank → part of → RS-25) inferred: the other reading of “has part(s)”
- (RS-25 → has part(s) → Space Shuttle external tank) inferred: implied by “powered by” (above)
- Intertank Concept
- (Intertank → part of → Space Shuttle external tank) The intertank is the structural connection between the LOX and LH2 tanks of the Space Shuttle external tank.1
- (Space Shuttle external tank → has part(s) → Intertank) inferred: the other reading of “part of” (above)
- Liquid hydrogen tank Concept
- (Liquid hydrogen tank → part of → Space Shuttle external tank) The liquid hydrogen tank forms the bottom portion of the external tank.1
- (Space Shuttle external tank → has part(s) → Liquid hydrogen tank) inferred: the other reading of “part of” (above)
- Louisiana Place
- (Space Shuttle external tank → located in → Louisiana) The Space Shuttle external tank arrived from its manufacturing facility in Louisiana by barge.5
- STS-2 Concept
- (Space Shuttle external tank → used by → STS-2) The first two external tanks, used for STS-1 and STS-2, were painted white to protect them from ultraviolet light during the extended time the shuttle spent on the launch pad.1
- Martin Marietta Organization
- (Martin Marietta → product or material produced → Space Shuttle external tank) Martin Marietta products included the Titan rockets, Sandia National Laboratories management contract, the Space Shuttle External Tank, and Viking 1 and Viking 2 landers.8
- STS-36 Concept
- (Space Shuttle external tank → used by → STS-36) The last Space Shuttle flight with the external tank's liquid oxygen tumble valve active was STS-36.1
- California Science Center Place
- (Space Shuttle external tank → located in → California Science Center) The Space Shuttle external tank ET-94 was scheduled in 2019 to be displayed with Space Shuttle Endeavour at the California Science Center when the Samuel Oschin Air and Space Center opened.1
Show 12 more connections
- U.S. Space & Rocket Center Place
- (Space Shuttle external tank → located in → U.S. Space & Rocket Center) The Space Shuttle external tank MPTA-ET is on display with the Space Shuttle Pathfinder at the U.S. Space & Rocket Center in Huntsville, Alabama.1
- Artemis II Object
- (Space Shuttle external tank → part of → Artemis II) inferred: the other reading of “has part(s)”
- (Artemis II → has part(s) → Space Shuttle external tank) inferred: the other reading of “part of”
- Artemis program Concept
- (Space Shuttle external tank → part of → Artemis program) inferred: through Artemis II, as “part of” carries over; stated: Artemis II, the first crewed mission of the Artemis program, was planned to launch on April 1, 2026 on a free-return flyby of the Moon.7
- (Artemis program → has part(s) → Space Shuttle external tank) inferred: through Artemis II, as “has part(s)” carries over; stated: As of 2026, the Artemis program has flown two successful missions, Artemis I and Artemis II.9
- Human spaceflight Object
- (Space Shuttle external tank → part of → Human spaceflight) inferred: the other reading of “has part(s)”
- (Human spaceflight → has part(s) → Space Shuttle external tank) inferred: the other reading of “part of”
- Space Shuttle program Object
- (Space Shuttle external tank → part of → Space Shuttle program) inferred: the other reading of “has part(s)”
- (Space Shuttle program → has part(s) → Space Shuttle external tank) inferred: the other reading of “part of”
- Artemis IV Event
- (Space Shuttle external tank → part of → Artemis IV) inferred: the other reading of “has part(s)”
- (Artemis IV → has part(s) → Space Shuttle external tank) inferred: the other reading of “part of”
- Space Shuttle orbiter Object
- (Space Shuttle external tank → part of → Space Shuttle orbiter) inferred: through Orbital Maneuvering System, as “part of” carries over; stated: Two Orbital Maneuvering System thrusters were mounted in two separate removable pods on the orbiter's aft fuselage.10
- (Space Shuttle orbiter → has part(s) → Space Shuttle external tank) inferred: the other reading of “part of”
- Starship HLS Object
- (Space Shuttle external tank → part of → Starship HLS) inferred: through Artemis IV, as “part of” carries over; stated: The first crewed landing with the Starship Human Landing System has been moved to Artemis IV, targeted for 2028.11
- (Starship HLS → has part(s) → Space Shuttle external tank) inferred: the other reading of “part of”
- Human Landing System Concept
- (Space Shuttle external tank → part of → Human Landing System) inferred: the other reading of “has part(s)”
- (Human Landing System → has part(s) → Space Shuttle external tank) inferred: the other reading of “part of”
- Huntsville, Alabama Place
- (Space Shuttle external tank → located in → Huntsville, Alabama) inferred: through U.S. Space & Rocket Center, as “located in” carries over; stated: The Space Shuttle external tank MPTA-ET is on display with the Space Shuttle Pathfinder at the U.S. Space & Rocket Center in Huntsville, Alabama.1
- Orbital Maneuvering System Object
- (Space Shuttle external tank → part of → Orbital Maneuvering System) inferred: the other reading of “has part(s)”
- (Orbital Maneuvering System → has part(s) → Space Shuttle external tank) inferred: the other reading of “part of”
- Space Launch System core stage Object
- (Space Shuttle external tank → part of → Space Launch System core stage) inferred: the other reading of “has part(s)”
- (Space Launch System core stage → has part(s) → Space Shuttle external tank) inferred: the other reading of “part of”
Named together
Subjects that share a fact with Space Shuttle external tank, with no typed link between them yet.
- Space Shuttle Solid Rocket Booster 5 shared facts
- Unlike the Solid Rocket Boosters, the Space Shuttle external tanks were not re-used.1
- Space Launch System 3 shared facts
- The Space Launch System core stage is 65 meters (213 ft) long and 8.4 meters (28 ft) in diameter, matching the diameter of the Space Shuttle external tank.13
- Space Shuttle Endeavour 2 shared facts
- The Space Shuttle external tank ET-94 was scheduled in 2019 to be displayed with Space Shuttle Endeavour at the California Science Center when the Samuel Oschin Air and Space Center opened.1
- STS-114 2 shared facts
- On STS-114, cameras mounted on the external tank recorded a piece of foam separating from one of its Protuberance Air Load ramps, and that piece did not impact the orbiter.1
- Mars 1 shared fact
- Plans for reusing external tanks ranged from space station living space to rocket fuel tanks for Mars missions, though the tanks were always discarded.1
- Hydrogen 1 shared fact
- The tank of the Space Shuttle external tank was the largest part of the tank's aft liquid hydrogen section, but it was relatively light due to liquid hydrogen's very low density.1
- NASA 1 shared fact
- Over the years NASA worked to reduce the weight of the external tank, and the weight reduction resulted in an almost equal increase of the Space Shuttle's cargo-carrying capability.1
- International Space Station 1 shared fact
- The super lightweight external tank weighed 3,400 kg (7,500 lb) less than the lightweight tank, which allowed the Space Shuttle to deliver heavy elements to the ISS high inclination orbit.2
- Ares 1 shared fact
- In The Case for Mars, the proposed Ares rocket would have used the Space Shuttle external tank powered by four Space Shuttle Main Engines and a second stage powered by an RL10 engine.14
- Skylab 1 shared fact
- A planned orbital vehicle space dock for Skylab would have used the Space Shuttle's external tank.12
- Space Shuttle Discovery 1 shared fact
- Cameras were added to the bellies of Discovery, Atlantis, and Endeavour, allowing digital images of the external tank to be viewed on the ground soon after launch.4
- Eileen Collins 1 shared fact
- Eileen Collins visited the Michoud Assembly Facility in New Orleans, Louisiana, where the Space Shuttle external tank was assembled.15
- Space Shuttle Enterprise 1 shared fact
- During the Mated Vertical Ground Vibration Test, Enterprise was mated to an empty External Tank and dummy Solid Rocket Boosters, creating a boilerplate version of the complete Space Shuttle stack for the first time.16
- Robert Crippen 1 shared fact
- Pilot Crippen reported seeing "white stuff" coming off the External Tank and splattering the windows during the launch up to SRB separation.3
- STS-107 1 shared fact
- During the launch of STS-107, a piece of insulating foam broke off the Space Shuttle external tank and struck the thermal protection system tiles on the orbiter's left wing.4
- Ares I 1 shared fact
- The Ares I second stage would have held about 26,000 US gallons of LOX, while the external tank held 146,000 US gallons, more than five times that amount.1
Also named with Space Shuttle external tank: Marshall Space Flight Center, Pacific Ocean, Indian Ocean, STS-3, Range safety, Gaseous Oxygen Vent Arm, Ground Umbilical Carrier Plate, Ultraviolet, Liquid oxygen, Michael P. Anderson, Liquid hydrogen, STS-118, STS-6, Trichlorofluoromethane, STS-91, Space Shuttle Pathfinder, Sea lane, 1,1-Dichloro-1-fluoroethane, Relief valve, Ullage, Polyurethane foam.
Space Shuttle external tank: facts
58 facts in 7 categories · rated most surprising
Making and creation (4 facts)
- To prevent future foam strikes, the external tank was redesigned to remove foam from the bipod.4
- The report determined that the external tank ET-93 had been constructed with BX-250, a closeout foam whose blowing agent was CFC-11 and not the newer HCFC 141b.1
- The super lightweight external tank first flew on STS-91 in 1998.2
- The external tank was mounted between the stacked Solid Rocket Boosters, and then a massive crane lowered and connected the orbiter to it.5
Events (8 facts)
- Anomalies in foam application on the Space Shuttle external tank were so frequent that they were treated as variances, not safety incidents.1
- On December 18, 2007, a tanking test determined that the cause of the fuel depletion sensor errors was a fault in a wiring connector rather than a failure of the sensors themselves.1
- The Space Shuttle external tank was jettisoned just over 10 seconds after main engine cut-off.1
- The Space Shuttle external tank broke up before impact in the Indian Ocean, or in the Pacific Ocean for direct-insertion launch trajectories, away from shipping lanes, and was not recovered.1
- On STS-114, cameras mounted on the external tank recorded a piece of foam separating from one of its Protuberance Air Load ramps, and that piece did not impact the orbiter.1
- Reports published concurrent with the STS-114 mission suggest that excessive handling of the external tank during modification and upgrade may have contributed to the foam loss on Discovery's Return to Flight mission.1
- Removing hydrogen from the external tank after a leak at the ground umbilical carrier plate requires complete draining and a 20-hour helium gas purge.1
- After its fuel was expended, the external tank separated from the orbiter and broke apart during re-entry, with its pieces landing in the Indian or Pacific Ocean.4
Places (3 facts)
- The Space Shuttle external tank ET-94 was scheduled in 2019 to be displayed with Space Shuttle Endeavour at the California Science Center when the Samuel Oschin Air and Space Center opened.1
- In January 2024, ET-94, two solid rocket boosters and the Space Shuttle Endeavour were linked together for a move to their new exhibit location.1
- The Space Shuttle external tank MPTA-ET is on display with the Space Shuttle Pathfinder at the U.S. Space & Rocket Center in Huntsville, Alabama.1
By the numbers (3 facts)
- The unpainted External Tank saved approximately 272 kg (600 lb) in weight and gave the tank its distinctive orange color.3
- The Space Shuttle external tank's thermal protection system weighs 4,823 lb (2,188 kg).1
- Three other external tanks were in preparation when the manufacturing of external tanks stopped.1
Details and parts (35 facts)
- The Space Shuttle external tank was covered in 270 kg (595 lb) of white fire-retardant latex paint on the first two missions, STS-1 and STS-2.2
- Unlike the Solid Rocket Boosters, the Space Shuttle external tanks were not re-used.1
- The tank of the Space Shuttle external tank was the largest part of the tank's aft liquid hydrogen section, but it was relatively light due to liquid hydrogen's very low density.1
- The first two external tanks, used for STS-1 and STS-2, were painted white to protect them from ultraviolet light during the extended time the shuttle spent on the launch pad.1
- The Space Shuttle external tank's dual-function vent and relief valve can open during flight when the ullage pressure of the liquid hydrogen tank reaches 38 psi (260 kPa).1
- On early flights, the external tank's liquid oxygen tank contained a separate, pyrotechnically operated, propulsive tumble vent valve at its forward end.1
- The cap on the external tank's oxygen vent siphons off oxygen vapor that threatens to form large ice accumulations, protecting the orbiter's thermal protection system during launch.1
- If any two of the fuel or oxidizer sensors on the Space Shuttle external tank sense a dry condition, the engines will be shut down.1
27 more facts in details and parts
- Earlier Space Shuttle external tanks incorporated a range safety system to disperse tank propellants if necessary.1
- The Space Shuttle's external tank was expendable and held liquid hydrogen and liquid oxygen.2
- The Space Shuttle external tank was the only major component of the Space Shuttle system that was not reused.2
- The latex paint on the external tank was dropped from STS-3 onward after research found the orange foam was sufficiently protected.2
- The super lightweight external tank used the 2195 aluminum-lithium alloy, which was 40% stronger and 10% less dense than the 2219 aluminum-lithium alloy it replaced.2
- The super lightweight external tank weighed 3,400 kg (7,500 lb) less than the lightweight tank, which allowed the Space Shuttle to deliver heavy elements to the ISS high inclination orbit.2
- The lightweight external tank first flew on STS-6 and reduced tank weight by 4,700 kg (10,300 lb).2
- The external tank held liquid hydrogen stored at −423 °F (−253 °C) and a smaller tank of liquid oxygen stored at −297 °F (−183 °C).4
- The external tank was covered in insulating foam to keep its liquids cold and prevent ice forming on its exterior.4
- Electric heaters were installed on the external tank's bipod to prevent ice building up due to the cold liquid oxygen in its feedlines.4
- The Space Shuttle external tank arrived from its manufacturing facility in Louisiana by barge.5
- The Space Shuttle external tank contained the liquid hydrogen fuel and liquid oxygen oxidizer for the Space Shuttle launch vehicle.1
- During lift-off and ascent, the Space Shuttle external tank supplied fuel and oxidizer under pressure to the three RS-25 main engines in the orbiter.1
- The external tank was the backbone of the Space Shuttle during launch, providing structural support for attachment with the Space Shuttle Solid Rocket Boosters and orbiter.1
- The Space Shuttle external tank's thermal protection system consists primarily of spray-on foam insulation, plus preformed foam pieces and premolded ablator materials.1
- The external tank's hardware, ET–orbiter attachment fittings, umbilical fittings, and electrical and range safety system weigh 9,100 pounds (4,100 kg).1
- Each propellant tank of the Space Shuttle external tank has a vent and relief valve at its forward end.1
- At separation, the external tank's liquid oxygen tumble vent valve was opened, providing impulse to assist in the separation maneuver.1
- The Space Shuttle external tank's umbilical plates are bolted together to provide physical strength.1
- The Space Shuttle external tank has five propellant umbilical valves: two for the liquid oxygen tank and three for the liquid hydrogen tank.1
- A cap on the fixed service structure's swing-arm covers the external tank's oxygen tank vent during the countdown and is retracted about two minutes before lift-off.1
- The Space Shuttle external tank has eight propellant-depletion sensors, four each for fuel and oxidizer.1
- The range safety system on the Space Shuttle external tank included a battery power source, a receiver/decoder, antennas and ordnance.1
- The Space Shuttle external tank was a bright orange throwaway tank from which the RS-25 engines sourced their fuel.6
- The Space Shuttle external tank was 47 m (153.8 ft) tall and 8.4 m (27.6 ft) in diameter.2
- The Space Shuttle external tank travelled along a ballistic trajectory into the Indian or Pacific Ocean after separation.2
- External tank ET-139 is at an advanced stage of manufacturing.1
Look and appearances (1 fact)
- The external tank's orange color is the color of the spray-on foam insulation.1
More facts (4 facts)
- One proposal was to carry the primary mirror of a 7-meter aperture telescope with the external tank.1
- In 1990, it was suggested that the Space Shuttle external tank would be used as a lunar habitat or as an orbital station.1
- Plans for reusing external tanks ranged from space station living space to rocket fuel tanks for Mars missions, though the tanks were always discarded.1
- The proposals to use the Space Shuttle external tank as a lunar habitat or orbital station did not come to fruition.1
Mentioned on other pages
35 facts about other subjects name Space Shuttle external tank; the 24 most surprising
- Space Shuttle Columbia: During STS-107 on January 16, 2003, a piece of foam insulation detached from one of the external tank's bipod ramps and struck the leading edge of Space Shuttle Columbia's wing at a few hundred miles per hour.1
- STS-107: During the launch of STS-107, a piece of insulating foam broke off the Space Shuttle external tank and struck the thermal protection system tiles on the orbiter's left wing.4
- Polyurethane foam: About 81.7 seconds after launch, a piece of foam roughly 21 to 27 inches long broke off from the left bipod on the external tank.4
- Gaseous Oxygen Vent Arm: The Gaseous Oxygen Vent Arm's hood used heated gaseous nitrogen to remove extremely cold gaseous oxygen vented from the external tank, which prevented ice from forming that could fall and damage the shuttle.5
- STS-118: On STS-118, a piece of foam or ice about 3.9 in (100 mm) in diameter separated from a feedline attachment bracket on the external tank, ricocheted off an aft strut and struck the underside of the wing, damaging two tiles.1
- Space Shuttle Enterprise: During the Mated Vertical Ground Vibration Test, Enterprise was mated to an empty External Tank and dummy Solid Rocket Boosters, creating a boilerplate version of the complete Space Shuttle stack for the first time.16
- Space Launch System: The Space Launch System core stage is 65 meters (213 ft) long and 8.4 meters (28 ft) in diameter, matching the diameter of the Space Shuttle external tank.13
- Space Launch System: The Space Launch System core stage is visually similar to the Space Shuttle external tank because of its rust-colored spray-on insulation.13
- Martin Marietta: Martin Marietta products included the Titan rockets, Sandia National Laboratories management contract, the Space Shuttle External Tank, and Viking 1 and Viking 2 landers.8
- Michael P. Anderson: Michael P. Anderson photographed the external tank separation, but neither the photographs nor the recordings showed the bipod with missing foam.4
- Space Shuttle Discovery: Cameras were added to the bellies of Discovery, Atlantis, and Endeavour, allowing digital images of the external tank to be viewed on the ground soon after launch.4
- RS-25: The RS-25 engines used liquid hydrogen and liquid oxygen from the external tank, because the orbiter had no room for internal fuel tanks.5
- Gaseous Oxygen Vent Arm: The Gaseous Oxygen Vent Arm positioned a hood, often called the Beanie Cap, over the top of the external tank nose cone during fueling.5
- Ground Umbilical Carrier Plate: The Ground Umbilical Carrier Plate released from the external tank at launch and fell away with a curtain of water sprayed across it for protection from flames.5
- Robert Crippen: Pilot Crippen reported seeing "white stuff" coming off the External Tank and splattering the windows during the launch up to SRB separation.3
- Space Shuttle Columbia: The strike plate next to the forward latch of Columbia's external-tank door was melted and distorted by excess heat during reentry.3
- STS-3: All Space Shuttle flights from STS-3 onward used an unpainted External Tank to reduce the Shuttle's overall weight.3
- Ares: In The Case for Mars, the proposed Ares rocket would have used the Space Shuttle external tank powered by four Space Shuttle Main Engines and a second stage powered by an RL10 engine.14
- Space Shuttle orbiter: NASA's first orbital test flight of a complete, crewed Space Shuttle, consisting of the orbiter, an external fuel tank, and two solid rocket boosters, took place on April 12, 1981.18
- NASA: Over the years NASA worked to reduce the weight of the external tank, and the weight reduction resulted in an almost equal increase of the Space Shuttle's cargo-carrying capability.1
- STS-36: The last Space Shuttle flight with the external tank's liquid oxygen tumble valve active was STS-36.1
- Ares I: The Ares I second stage would have held about 26,000 US gallons of LOX, while the external tank held 146,000 US gallons, more than five times that amount.1
- Space Launch System: The Space Launch System's core stage is structurally similar to the Space Shuttle external tank.1
- Space Shuttle orbiter: The orbiter carried most of the Space Shuttle's liquid-propellant rocket system, while its liquid hydrogen fuel and liquid oxygen oxidizer for its three main rocket engines came from an external cryogenic propellant tank.10
Sources
18 pages the facts on this page were read from
- Space Shuttle external tank en.wikipedia.org
- Space Shuttle en.wikipedia.org
- STS-1 en.wikipedia.org
- Space Shuttle Columbia disaster en.wikipedia.org
- Kennedy Space Center Launch Complex 39 en.wikipedia.org
- Spacecraft en.wikipedia.org
- Space Shuttle program en.wikipedia.org
- Lockheed Martin en.wikipedia.org
- Artemis program en.wikipedia.org
- Space Shuttle orbiter en.wikipedia.org
- SpaceX Starship en.wikipedia.org
- Skylab en.wikipedia.org
- Space Launch System en.wikipedia.org
- Ares V en.wikipedia.org
- Eileen Collins en.wikipedia.org
- Boilerplate (spaceflight) en.wikipedia.org
- Marshall Space Flight Center en.wikipedia.org
- Space Race en.wikipedia.org
Facts are short sentences the Trivia Zone knowledge graph read from these pages; Wikipedia text is available under CC BY-SA 4.0 and Wikidata under CC0. Names, classes and links come from Wikidata.