O-ring
Mechanical, toroid gasket that seals an interface
The O-ring stiffness information that Sally Ride passed on was eventually identified as the cause of the Challenger explosion.1 The O-rings were redesignated Criticality 1, dropping the "R" because they were no longer considered a redundant system.2
A summary made of O-ring's own facts, quoted as read; each sentence cites its source.
Connections
11 linked subjects · 24 links inferred · 9 named together
A link reads subject → relation → subject. Each is stated by a fact (quoted, with its source), taken from Wikidata, or worked out by the knowledge graph's reasoner from the links it was given; inferred links are marked ∴ with the rule behind them.
- stated
- inferred
- named together
- Space Shuttle Challenger Concept
- (Space Shuttle Challenger → has cause → O-ring) The Challenger disaster was caused by the failure of an O-ring, a seal used between segments of the solid rocket booster casing, after low-temperature impairment.5 and 1 more fact
- (O-ring → followed by → Space Shuttle Challenger) inferred: the other reading of “follows”
- (O-ring → has effect → Space Shuttle Challenger) inferred: the other reading of “has cause” (above)
- (O-ring → part of → Space Shuttle Challenger) inferred: through Space Shuttle Solid Rocket Booster, as “part of” carries over; stated: Test data since 1977 had demonstrated a potentially catastrophic flaw in the O-rings of the Solid Rocket Boosters, but neither NASA nor manufacturer Morton Thiokol had addressed this known defect.2
- (Space Shuttle Challenger → follows → O-ring) inferred: implied by “has cause” (above)
- (Space Shuttle Challenger → has part(s) → O-ring) inferred: through Space Shuttle Solid Rocket Booster, as “has part(s)” carries over; stated: The segments of each Space Shuttle solid rocket booster were fixed together with O-rings that were originally two in number and changed to three after the Challenger Disaster in 1986.6
-
- (O-ring → part of → Space Shuttle Solid Rocket Booster) Test data since 1977 had demonstrated a potentially catastrophic flaw in the O-rings of the Solid Rocket Boosters, but neither NASA nor manufacturer Morton Thiokol had addressed this known defect.2 and 1 more fact
- (Space Shuttle Solid Rocket Booster → has part(s) → O-ring) The segments of each Space Shuttle solid rocket booster were fixed together with O-rings that were originally two in number and changed to three after the Challenger Disaster in 1986.6
- The Challenger Disaster Work
- (The Challenger Disaster → has cause → O-ring) The O-ring stiffness information that Sally Ride passed on was eventually identified as the cause of the Challenger explosion.1
- (O-ring → followed by → The Challenger Disaster) inferred: the other reading of “follows”
- (O-ring → has effect → The Challenger Disaster) inferred: the other reading of “has cause” (above)
- (The Challenger Disaster → follows → O-ring) inferred: implied by “has cause” (above)
- Space Shuttle Object
- (O-ring → part of → Space Shuttle) inferred: through Orbital Maneuvering System, as “part of” carries over; stated: The Space Shuttle orbiter's Orbital Maneuvering System allowed the orbiter to achieve, alter, and exit its orbit once in space.5
- (Space Shuttle → has part(s) → O-ring) inferred: through Orbital Maneuvering System, as “has part(s)” carries over; stated: The Space Shuttle's OMS and RCS systems posed the primary dangers on retired orbiters because of their toxic hypergolic propellant, so most of their components were permanently removed to prevent dangerous outgassing.7
- Artemis program Concept
- (O-ring → part of → Artemis program) inferred: the other reading of “has part(s)”
- (Artemis program → has part(s) → O-ring) inferred: the other reading of “part of”
- Human spaceflight Object
- (O-ring → part of → Human spaceflight) inferred: the other reading of “has part(s)”
- (Human spaceflight → has part(s) → O-ring) inferred: the other reading of “part of”
- Constellation program Concept
- (O-ring → part of → Constellation program) inferred: the other reading of “has part(s)”
- (Constellation program → has part(s) → O-ring) inferred: through Ares I, as “has part(s)” carries over; stated: The Constellation program, including Ares V and Ares I, was canceled in October 2010 by the NASA Authorization Act of 2010.8
- Ares I Object
- (O-ring → part of → Ares I) inferred: through Space Shuttle Solid Rocket Booster, as “part of” carries over; stated: Test data since 1977 had demonstrated a potentially catastrophic flaw in the O-rings of the Solid Rocket Boosters, but neither NASA nor manufacturer Morton Thiokol had addressed this known defect.2
- (Ares I → has part(s) → O-ring) inferred: through Space Shuttle Solid Rocket Booster, as “has part(s)” carries over; stated: The segments of each Space Shuttle solid rocket booster were fixed together with O-rings that were originally two in number and changed to three after the Challenger Disaster in 1986.6
- Space Shuttle program Object
- (O-ring → part of → Space Shuttle program) inferred: the other reading of “has part(s)”
- (Space Shuttle program → has part(s) → O-ring) inferred: the other reading of “part of”
- Space Shuttle orbiter Object
- (O-ring → part of → Space Shuttle orbiter) inferred: through Orbital Maneuvering System, as “part of” carries over; stated: Two Orbital Maneuvering System thrusters were mounted in two separate removable pods on the orbiter's aft fuselage.9
- (Space Shuttle orbiter → has part(s) → O-ring) inferred: the other reading of “part of”
- Orbital Maneuvering System Object
- (O-ring → part of → Orbital Maneuvering System) inferred: the other reading of “has part(s)”
- (Orbital Maneuvering System → has part(s) → O-ring) inferred: the other reading of “part of”
Named together
Subjects that share a fact with O-ring, with no typed link between them yet.
- NASA 2 shared facts
- Test data since 1977 had demonstrated a potentially catastrophic flaw in the O-rings of the Solid Rocket Boosters, but neither NASA nor manufacturer Morton Thiokol had addressed this known defect.2
- Sally Ride 2 shared facts
- After Sally Ride's death in 2012, Major General Donald J. Kutyna revealed that she had discreetly provided him with key information that O-rings become stiff at low temperatures.1
- Thiokol 2 shared facts
- Test data since 1977 had demonstrated a potentially catastrophic flaw in the O-rings of the Solid Rocket Boosters, but neither NASA nor manufacturer Morton Thiokol had addressed this known defect.2
- Richard Feynman 1 shared fact
- To protect Sally Ride as a source, the O-ring information was fed to physicist Richard Feynman, who was credited for discovering and making public the O-ring problem.1
- Hayabusa 1 shared fact
- In 2002, launch of Hayabusa was postponed from December 2002 to May 2003 to recheck the O-rings of its reaction control system, since one had been found to use a different material than specified.10
- Rogers Commission Report 1 shared fact
- The Rogers Commission concluded that an O-ring seal in one of Space Shuttle Challenger's solid rocket boosters failed to contain pressurized burning gas.3
- Morton Thiokol engineers 2 shared facts
- Morton Thiokol engineers determined that cold temperatures reduced the flexibility of the O-rings, decreasing their ability to seal the field joints and letting hot gas and soot pass the primary O-ring.2
- STS-2 1 shared fact
- The first occurrence of in-flight O-ring erosion happened on the right solid rocket booster on STS-2 in November 1981.2
- STS-51-B 1 shared fact
- O-ring erosion occurred on every Space Shuttle flight in 1985 except STS-51-J, and both primary and secondary O-rings eroded on STS-51-B.2
O-ring: facts
9 facts in 2 categories · rated most surprising
Events (7 facts)
- The Rogers Commission concluded that an O-ring seal in one of Space Shuttle Challenger's solid rocket boosters failed to contain pressurized burning gas.3
- The O-ring stiffness information that Sally Ride passed on was eventually identified as the cause of the Challenger explosion.1
- Test data since 1977 had demonstrated a potentially catastrophic flaw in the O-rings of the Solid Rocket Boosters, but neither NASA nor manufacturer Morton Thiokol had addressed this known defect.2
- A failure of an O-ring seal on the starboard Solid Rocket Booster was determined to have caused the shuttle to break up in flight.4
- The record-low temperatures on the morning of the launch stiffened the rubber O-rings, reducing their ability to seal the joints.2
- The cold temperature in the joint prevented the O-rings from creating a seal.2
- Hot gas was able to travel past the O-rings and erode them.2
Details and parts (2 facts)
- The O-rings were redesignated Criticality 1, dropping the "R" because they were no longer considered a redundant system.2
- In the early 1970s, evaluations of the proposed Space Shuttle solid rocket booster design and field joint testing showed that wide tolerances between mated parts allowed the O-rings to be extruded from their seats rather than compressed.2
Mentioned on other pages
13 facts about other subjects name O-ring
- Sally Ride: After Sally Ride's death in 2012, Major General Donald J. Kutyna revealed that she had discreetly provided him with key information that O-rings become stiff at low temperatures.1
- Richard Feynman: To protect Sally Ride as a source, the O-ring information was fed to physicist Richard Feynman, who was credited for discovering and making public the O-ring problem.1
- STS-2: The first occurrence of in-flight O-ring erosion happened on the right solid rocket booster on STS-2 in November 1981.2
- Morton Thiokol engineers: Morton Thiokol engineers determined that cold temperatures reduced the flexibility of the O-rings, decreasing their ability to seal the field joints and letting hot gas and soot pass the primary O-ring.2
- STS-51-B: O-ring erosion occurred on every Space Shuttle flight in 1985 except STS-51-J, and both primary and secondary O-rings eroded on STS-51-B.2
- NASA: Negative media coverage of the repeated launch postponements was later cited as one of several factors that pressured NASA officials to ignore potential O-ring issues so Challenger could launch as soon as possible.2
- Thiokol: Engineers argued they did not have enough data to determine whether the O-rings would seal at temperatures colder than 53 °F (12 °C), the coldest Space Shuttle launch to date.2
- Space Shuttle Solid Rocket Booster: The segments of each Space Shuttle solid rocket booster were fixed together with O-rings that were originally two in number and changed to three after the Challenger Disaster in 1986.6
- Hayabusa: In 2002, launch of Hayabusa was postponed from December 2002 to May 2003 to recheck the O-rings of its reaction control system, since one had been found to use a different material than specified.10
- Space Shuttle Solid Rocket Booster: After the Challenger disaster, caused by an O-ring failing at low temperature, the Solid Rocket Boosters were redesigned to provide a constant seal regardless of ambient temperature.5
- Space Shuttle Challenger: The Challenger disaster was caused by the failure of an O-ring, a seal used between segments of the solid rocket booster casing, after low-temperature impairment.5
- Space Shuttle Challenger: The disaster was caused by the failure of the primary and secondary O-ring seals in a joint in the right Space Shuttle Solid Rocket Booster.2
- Morton Thiokol engineers: Morton Thiokol engineers also recommended adding a spacer for extra thermal protection and using an O-ring with a larger cross section.2
Sources
10 pages the facts on this page were read from
- Sally Ride en.wikipedia.org
- Space Shuttle Challenger disaster en.wikipedia.org
- Space Shuttle Challenger en.wikipedia.org
- STS-51-L en.wikipedia.org
- Space Shuttle en.wikipedia.org
- Space Shuttle Solid Rocket Booster en.wikipedia.org
- Space Shuttle program en.wikipedia.org
- Ares V en.wikipedia.org
- Space Shuttle orbiter en.wikipedia.org
- Hayabusa en.wikipedia.org
Facts are short sentences the Trivia Zone knowledge graph read from these pages; Wikipedia text is available under CC BY-SA 4.0 and Wikidata under CC0. Names, classes and links come from Wikidata.