Space rendezvous
Orbital maneuver
The same rendezvous technique can be used to land spacecraft on natural objects with a weak gravitational field, such as the Martian moons.1 Speeding up to catch another spacecraft raises the orbit and increases the distance, so rendezvous requires going to a lower orbit first.2 Rendezvous requires a precise match of the orbital velocities and position vectors of the two spacecraft, allowing them to remain at a constant distance through orbital station-keeping.1
A summary made of Space rendezvous's own facts, quoted as read; each sentence cites its source.
Connections
7 linked subjects · 3 links inferred · 16 named together
A link reads subject → relation → subject. Each is stated by a fact (quoted, with its source), taken from Wikidata, or worked out by the knowledge graph's reasoner from the links it was given; inferred links are marked ∴ with the rule behind them.
- stated
- inferred
- named together
- Gemini 5 Object
- (Gemini 5 → has goal → Space rendezvous) The Gemini 5 mission was meant to practice space rendezvous and to develop procedures and equipment for a seven-day flight needed for a Moon mission.3
- Reaction control system Object
- (Reaction control system → used by → Space rendezvous) In the very final phase of approach, the closure rate is reduced by use of the active vehicle's reaction control system.1
- Lunar orbit rendezvous Concept
- (Lunar orbit rendezvous → instance of → Space rendezvous) After the lander's surface mission, it returns to lunar orbit to rendezvous and re-dock with the main spacecraft.4
- (Space rendezvous → has instance → Lunar orbit rendezvous) inferred: the other reading of “instance of” (above)
- Docking and berthing of spacecraft Object
- (Space rendezvous → followed by → Docking and berthing of spacecraft) A rendezvous may or may not be followed by docking or berthing, which bring the spacecraft into physical contact and create a link between them.1
- (Docking and berthing of spacecraft → follows → Space rendezvous) inferred: the other reading of “followed by” (above)
- Orbital maneuver Concept
- (Space rendezvous → has part(s) → Orbital maneuver) A space rendezvous is a set of orbital maneuvers during which two spacecraft arrive at the same orbit and approach to a very close distance, such as within visual contact.1
- (Orbital maneuver → part of → Space rendezvous) inferred: the other reading of “has part(s)” (above)
- Spaceflight Concept
- (Spaceflight → significant event → Space rendezvous) from Wikidata
- Project Gemini Concept
- (Project Gemini → has goal → Space rendezvous) from Wikidata
Named together
Subjects that share a fact with Space rendezvous, with no typed link between them yet.
- International Space Station 1 shared fact
- The chosen method of approach depends on safety, spacecraft and thruster design, mission timeline, and, especially for docking with the ISS, the location of the assigned docking port.1
- Spacecraft 1 shared fact
- A space rendezvous is a set of orbital maneuvers during which two spacecraft arrive at the same orbit and approach to a very close distance, such as within visual contact.1
- Space station 1 shared fact
- In a space rendezvous, one of the two spacecraft is often a space station.1
- Michael Collins 1 shared fact
- Michael Collins's first spaceflight was on Gemini 10 in 1966, where he and John Young performed orbital rendezvous with two spacecraft.5
- Moons of Mars 1 shared fact
- The same rendezvous technique can be used to land spacecraft on natural objects with a weak gravitational field, such as the Martian moons.1
- Gus Grissom 1 shared fact
- Gus Grissom invented the multi-axis translation thruster controller used to push Gemini and Apollo spacecraft in linear directions for rendezvous and docking.6
- Wally Schirra 1 shared fact
- Wally Schirra flew on Gemini 6A in December 1965 and achieved the first space rendezvous with sister spacecraft Gemini 7.7
- Apollo command and service module 1 shared fact
- Two forward-facing triangular rendezvous windows in the command module were used to aid in rendezvous and docking with the lunar module.8
- Gemini 6A 1 shared fact
- The Gemini 6 mission was planned to demonstrate space rendezvous techniques, a critical requirement for Apollo.9
- Earth orbit rendezvous 1 shared fact
- Earth orbit rendezvous involves using space rendezvous to assemble, and possibly fuel, components of a translunar vehicle in low Earth orbit.10
- Orbital elements 1 shared fact
- Rendezvous requires a precise match of the orbital velocities and position vectors of the two spacecraft, allowing them to remain at a constant distance through orbital station-keeping.1
- Translation 1 shared fact
- The two most common methods of approach for proximity operations are V-bar, in-line with the flight path, and R-bar, perpendicular to the flight path along the radius of the orbit.1
- Orthogonality 1 shared fact
- The two most common methods of approach for proximity operations are V-bar, in-line with the flight path, and R-bar, perpendicular to the flight path along the radius of the orbit.1
- Orbital plane 1 shared fact
- For orbital rendezvous to occur, both spacecraft must be in the same orbital plane and have matched orbital phase.1
- Orbital station-keeping 1 shared fact
- Rendezvous requires a precise match of the orbital velocities and position vectors of the two spacecraft, allowing them to remain at a constant distance through orbital station-keeping.1
- Orbit phasing 1 shared fact
- For orbital rendezvous to occur, both spacecraft must be in the same orbital plane and have matched orbital phase.1
Space rendezvous: facts
13 facts in 5 categories · rated most surprising
What it is (2 facts)
By the numbers (1 fact)
- Docking typically occurs at a rate of 0.1 ft/s (0.030 m/s) to 0.2 ft/s (0.061 m/s).1
Details and parts (1 fact)
- Rendezvous requires a precise match of the orbital velocities and position vectors of the two spacecraft, allowing them to remain at a constant distance through orbital station-keeping.1
Trivia (1 fact)
- Speeding up to catch another spacecraft raises the orbit and increases the distance, so rendezvous requires going to a lower orbit first.2
More facts (8 facts)
- The same rendezvous technique can be used to land spacecraft on natural objects with a weak gravitational field, such as the Martian moons.1
- The chaser is placed in a slightly lower orbit than the target so that it catches up with the target.1
- A rendezvous may or may not be followed by docking or berthing, which bring the spacecraft into physical contact and create a link between them.1
- The standard technique for rendezvous and docking is to dock an active vehicle, called the chaser, with a passive target.1
- For orbital rendezvous to occur, both spacecraft must be in the same orbital plane and have matched orbital phase.1
- In the very final phase of approach, the closure rate is reduced by use of the active vehicle's reaction control system.1
- The two most common methods of approach for proximity operations are V-bar, in-line with the flight path, and R-bar, perpendicular to the flight path along the radius of the orbit.1
- The chosen method of approach depends on safety, spacecraft and thruster design, mission timeline, and, especially for docking with the ISS, the location of the assigned docking port.1
Mentioned on other pages
13 facts about other subjects name Space rendezvous
- Wally Schirra: Wally Schirra flew on Gemini 6A in December 1965 and achieved the first space rendezvous with sister spacecraft Gemini 7.7
- Gus Grissom: Gus Grissom invented the multi-axis translation thruster controller used to push Gemini and Apollo spacecraft in linear directions for rendezvous and docking.6
- Gemini 5: Cooper and Conrad were to have made a practice space rendezvous with a pod deployed from Gemini 5, but electrical supply problems forced a switch to a simpler phantom rendezvous.11
- Project Gemini: Gemini flights overcame the early Soviet lead by performing several spacewalks and the first space rendezvous and docking of spacecraft.12
- Earth orbit rendezvous: Earth orbit rendezvous involves using space rendezvous to assemble, and possibly fuel, components of a translunar vehicle in low Earth orbit.10
- Project Gemini: Project Gemini was planned to develop space rendezvous, docking of two craft, and extra-vehicular activity.13
- Gemini 5: The Gemini 5 mission was meant to practice space rendezvous and to develop procedures and equipment for a seven-day flight needed for a Moon mission.3
- Project Gemini: Gemini demonstrated the orbital maneuvers necessary to achieve rendezvous and docking with another spacecraft.2
- Michael Collins: Michael Collins's first spaceflight was on Gemini 10 in 1966, where he and John Young performed orbital rendezvous with two spacecraft.5
- Project Gemini: Gemini missions proved orbital rendezvous and docking techniques that were crucial to a crewed lunar landing mission profile.14
- Apollo command and service module: Two forward-facing triangular rendezvous windows in the command module were used to aid in rendezvous and docking with the lunar module.8
- Lunar orbit rendezvous: After the lander's surface mission, it returns to lunar orbit to rendezvous and re-dock with the main spacecraft.4
- Gemini 6A: The Gemini 6 mission was planned to demonstrate space rendezvous techniques, a critical requirement for Apollo.9
Sources
14 pages the facts on this page were read from
- Space rendezvous en.wikipedia.org
- Project Gemini en.wikipedia.org
- Neil Armstrong en.wikipedia.org
- Lunar orbit rendezvous en.wikipedia.org
- Michael Collins (astronaut) en.wikipedia.org
- Gus Grissom en.wikipedia.org
- Project Mercury en.wikipedia.org
- Apollo command and service module en.wikipedia.org
- Jim Lovell en.wikipedia.org
- Earth orbit rendezvous en.wikipedia.org
- Gemini 5 en.wikipedia.org
- Human spaceflight en.wikipedia.org
- Space Race en.wikipedia.org
- Moon landing en.wikipedia.org
Facts are short sentences the Trivia Zone knowledge graph read from these pages; Wikipedia text is available under CC BY-SA 4.0 and Wikidata under CC0. Names, classes and links come from Wikidata.