Spacecraft–lunar module adapter
The spacecraft–lunar module adapter's exterior was covered by a thin layer of cork and painted white to minimize thermal stresses during ascent.1 The adapter panel problem led to a redesign using a spring-loaded hinge release system.1
A summary made of Spacecraft–lunar module adapter's own facts, quoted as read; each sentence cites its source.
Connections
3 linked subjects · 2 links inferred · 4 named together
A link reads subject → relation → subject. Each is stated by a fact (quoted, with its source), taken from Wikidata, or worked out by the knowledge graph's reasoner from the links it was given; inferred links are marked ∴ with the rule behind them.
- stated
- inferred
- named together
- Saturn V instrument unit Place
- (Spacecraft–lunar module adapter → located in → Saturn V instrument unit) The spacecraft–lunar module adapter was composed of four fixed panels bolted to the Instrument Unit on top of the S-IVB stage.1
- North American Aviation Person
- (Spacecraft–lunar module adapter → developer → North American Aviation) The spacecraft–LM adapter (SLA) was built by North American Aviation (Rockwell).1
- (Spacecraft–lunar module adapter → creator → North American Aviation) inferred: implied by “developer” (above)
- Huntsville, Alabama Place
- (Spacecraft–lunar module adapter → located in → Huntsville, Alabama) inferred: through Saturn V instrument unit, as “located in” carries over; stated: The spacecraft–lunar module adapter was composed of four fixed panels bolted to the Instrument Unit on top of the S-IVB stage.1
Named together
Subjects that share a fact with Spacecraft–lunar module adapter, with no typed link between them yet.
- Apollo 7 2 shared facts
- During Apollo 7 rendezvous practice, one spacecraft–lunar module adapter panel did not open to the full 45 degrees.1
- S-IVB 2 shared facts
- The spacecraft–LM adapter was a conical aluminum structure that connected the service module to the Saturn S-IVB rocket stage.1
- Lunar module 1 shared fact
- The LM was connected to the spacecraft–lunar module adapter at four points around the lower panels.1
- Apollo service module 1 shared fact
- The spacecraft–LM adapter was a conical aluminum structure that connected the service module to the Saturn S-IVB rocket stage.1
Spacecraft–lunar module adapter: facts
11 facts in 2 categories · rated most surprising
Making and creation (2 facts)
Details and parts (9 facts)
- The spacecraft–lunar module adapter's exterior was covered by a thin layer of cork and painted white to minimize thermal stresses during ascent.1
- The four fixed panels of the spacecraft–lunar module adapter were connected by hinges to four longer panels that opened from the top like flower petals.1
- The spacecraft–lunar module adapter used multiple signal paths, detonators and explosive charges so that one charge's detonation would set off another even if its detonator failed.1
- The spacecraft–LM adapter was a conical aluminum structure that connected the service module to the Saturn S-IVB rocket stage.1
- The spacecraft–LM adapter was made from 1.7-inch-thick aluminum honeycomb material.1
- The spacecraft–lunar module adapter was composed of four fixed panels bolted to the Instrument Unit on top of the S-IVB stage.1
- On all flights through Apollo 7, the spacecraft–lunar module adapter panels opened to a 45-degree angle as originally designed.1
- The redesigned spacecraft–lunar module adapter panels were pushed away from the S-IVB at about 5 mph (8 km/h).1
1 more fact in details and parts
- The LM was connected to the spacecraft–lunar module adapter at four points around the lower panels.1
Mentioned on other pages
1 fact about other subjects name Spacecraft–lunar module adapter
Sources
2 pages the facts on this page were read from
- Apollo (spacecraft) en.wikipedia.org
- Saturn IB en.wikipedia.org
Facts are short sentences the Trivia Zone knowledge graph read from these pages; Wikipedia text is available under CC BY-SA 4.0 and Wikidata under CC0. Names, classes and links come from Wikidata.