PerkinElmer
American corporation focused on life science research
During fabrication, a few tests using conventional null correctors correctly reported spherical aberration, but these results were dismissed.1 Perkin-Elmer simulated microgravity by supporting the mirror from the back with 130 rods that exerted varying amounts of force.1 Perkin-Elmer's schedules slipped at a rate of about one month per quarter, and at times delays reached one day for each day of work.1
A summary made of PerkinElmer's own facts, quoted as read; each sentence cites its source.
Connections
5 linked subjects · 2 links inferred · 5 named together
A link reads subject → relation → subject. Each is stated by a fact (quoted, with its source), taken from Wikidata, or worked out by the knowledge graph's reasoner from the links it was given; inferred links are marked ∴ with the rule behind them.
- stated
- inferred
- named together
- NASA Organization
- (PerkinElmer → contractor for → NASA) NASA found that Perkin-Elmer did not assign its best optical scientists to the Hubble mirror project, as it had for the prototype.1
- (NASA → has contractor → PerkinElmer) inferred: the other reading of “contractor for” (above)
- Hubble Space Telescope Concept
- (PerkinElmer → product or material produced → Hubble Space Telescope) Perkin-Elmer intended to grind the Hubble mirror using custom-built, computer-controlled polishing machines.1
- Marshall Space Flight Center Object
- (PerkinElmer → contractor for → Marshall Space Flight Center) Marshall Space Flight Center commissioned the optics company Perkin-Elmer to design and build the optical telescope assembly and Fine Guidance Sensors for the Space Telescope.1
- (Marshall Space Flight Center → has contractor → PerkinElmer) inferred: the other reading of “contractor for” (above)
- Fine guidance sensor Object
- (PerkinElmer → product or material produced → Fine guidance sensor) Marshall Space Flight Center commissioned the optics company Perkin-Elmer to design and build the optical telescope assembly and Fine Guidance Sensors for the Space Telescope.1
- Optical train Concept
- (PerkinElmer → product or material produced → Optical train) Marshall Space Flight Center commissioned the optics company Perkin-Elmer to design and build the optical telescope assembly and Fine Guidance Sensors for the Space Telescope.1
Named together
Subjects that share a fact with PerkinElmer, with no typed link between them yet.
- Space telescope 1 shared fact
- Marshall Space Flight Center commissioned the optics company Perkin-Elmer to design and build the optical telescope assembly and Fine Guidance Sensors for the Space Telescope.1
- Null corrector 3 shared facts
- During fabrication, a few tests using conventional null correctors correctly reported spherical aberration, but these results were dismissed.1
- Computer-aided manufacturing 1 shared fact
- Perkin-Elmer intended to grind the Hubble mirror using custom-built, computer-controlled polishing machines.1
- Corning Inc. 1 shared fact
- Construction of the Perkin-Elmer mirror began in 1979, starting from a blank manufactured by Corning from ultra-low expansion glass.1
- Allen Commission 1 shared fact
- The commission blamed the failings primarily on Perkin-Elmer.1
PerkinElmer: facts
10 facts in 3 categories · rated most surprising
Making and creation (6 facts)
- Perkin-Elmer simulated microgravity by supporting the mirror from the back with 130 rods that exerted varying amounts of force.1
- Marshall Space Flight Center commissioned the optics company Perkin-Elmer to design and build the optical telescope assembly and Fine Guidance Sensors for the Space Telescope.1
- Perkin-Elmer intended to grind the Hubble mirror using custom-built, computer-controlled polishing machines.1
- Construction of the Perkin-Elmer mirror began in 1979, starting from a blank manufactured by Corning from ultra-low expansion glass.1
- For the final figuring step, Perkin-Elmer switched to a custom-built reflective null corrector designed explicitly to meet very strict tolerances.1
- During the initial grinding and polishing of the mirror, Perkin-Elmer analyzed its surface with two conventional refractive null correctors.1
Events (3 facts)
- During fabrication, a few tests using conventional null correctors correctly reported spherical aberration, but these results were dismissed.1
- NASA reports at the time questioned Perkin-Elmer's managerial structure, and its polishing fell behind schedule and over budget.1
- NASA found that Perkin-Elmer did not assign its best optical scientists to the Hubble mirror project, as it had for the prototype.1
By the numbers (1 fact)
- Perkin-Elmer's schedules slipped at a rate of about one month per quarter, and at times delays reached one day for each day of work.1
Mentioned on other pages
2 facts about other subjects name PerkinElmer
Sources
1 page the facts on this page were read from
- Hubble Space Telescope en.wikipedia.org
Facts are short sentences the Trivia Zone knowledge graph read from these pages; Wikipedia text is available under CC BY-SA 4.0 and Wikidata under CC0. Names, classes and links come from Wikidata.