Mariner-R project
When the first Mariners were built, no test chamber existed to simulate the near-Venus solar environment, so their cooling techniques could not be tested before the live mission.1 An omnidirectional antenna on top of the Mariner R broadcast when the spacecraft was rolling or tumbling out of proper orientation, and its signal was much weaker than the primary antenna's.1 The name Mariner R was chosen because the spacecraft was a Ranger derivative.1
A summary made of Mariner-R project's own facts, quoted as read; each sentence cites its source.
Connections
7 linked subjects · 7 links inferred · 7 named together
A link reads subject → relation → subject. Each is stated by a fact (quoted, with its source), taken from Wikidata, or worked out by the knowledge graph's reasoner from the links it was given; inferred links are marked ∴ with the rule behind them.
- stated
- inferred
- named together
-
- (Jet Propulsion Laboratory → developer → Mariner-R project) NASA accepted a Jet Propulsion Laboratory proposal and the lab began an 11-month crash program to develop the Mariner R spacecraft, so named because it was a Ranger derivative.3
- (Jet Propulsion Laboratory → creator → Mariner-R project) inferred: implied by “developer” (above)
- Mariner 2 Object
- (Mariner 2 → part of → Mariner-R project) The Mariner 1 and Mariner 2 spacecraft are sometimes known as the Mariner R missions.1 and 1 more fact
- (Mariner-R project → has part(s) → Mariner 2) inferred: the other reading of “part of” (above)
- Mariner 1 Object
- (Mariner 1 → part of → Mariner-R project) The Mariner R spacecraft, including Mariner 1, weighed within 3 lb (1.4 kg) of its design weight of 447 lb (203 kg).3
- (Mariner-R project → has part(s) → Mariner 1) inferred: the other reading of “part of” (above)
- Solar cell Object
- (Mariner-R project → has part(s) → Solar cell) The Mariner R power system used switchgear that regulated and transmitted power from 9800 solar cells to a rechargeable 1000 watt silver-zinc storage battery.3
- (Solar cell → part of → Mariner-R project) inferred: the other reading of “has part(s)” (above)
- Radio receiver Object
- (Mariner-R project → has part(s) → Radio receiver) The Mariner R spacecraft carried a three-watt transmitter alongside its radio receiver.3
- (Radio receiver → part of → Mariner-R project) inferred: the other reading of “has part(s)” (above)
- Louver Concept
- (Mariner-R project → has part(s) → Louver) Mariner R used louvers to actively protect the case carrying its onboard computer from temperature extremes, alongside passive insulated and reflective components.3
- (Louver → part of → Mariner-R project) inferred: the other reading of “has part(s)” (above)
- Switchgear Concept
- (Mariner-R project → has part(s) → Switchgear) The Mariner R power system used switchgear that regulated and transmitted power from 9800 solar cells to a rechargeable 1000 watt silver-zinc storage battery.3
- (Switchgear → part of → Mariner-R project) inferred: the other reading of “has part(s)” (above)
Named together
Subjects that share a fact with Mariner-R project, with no typed link between them yet.
- Venus 1 shared fact
- The primary goal of the Mariner-R project was to launch two spacecraft sequentially to the near vicinity of Venus and perform radiometric temperature measurements of the planet.2
- Gyroscope 1 shared fact
- The sixth case of the Mariner R spacecraft carried three gyroscopes that determined its orientation in space.3
- Centaur 1 shared fact
- Mariner 2's predecessor plan was for Mariner R probes to be launched via the Atlas-Agena, because the Atlas-Centaur was not ready in time.1
- Watt 1 shared fact
- The Mariner R power system used switchgear that regulated and transmitted power from 9800 solar cells to a rechargeable 1000 watt silver-zinc storage battery.3
- Analog signal 1 shared fact
- The fifth case of the Mariner R spacecraft held electronics for digitizing the analog data received by its experiments for transmission.3
- Digital signal 1 shared fact
- The fifth case of the Mariner R spacecraft held electronics for digitizing the analog data received by its experiments for transmission.3
- Atlas-Agena 1 shared fact
- Mariner 2's predecessor plan was for Mariner R probes to be launched via the Atlas-Agena, because the Atlas-Centaur was not ready in time.1
Mariner-R project: facts
26 facts in 5 categories · rated most surprising
Making and creation (1 fact)
- The name Mariner R was chosen because the spacecraft was a Ranger derivative.1
Events (1 fact)
- The primary goal of the Mariner-R project was to launch two spacecraft sequentially to the near vicinity of Venus and perform radiometric temperature measurements of the planet.2
Details and parts (22 facts)
- An omnidirectional antenna on top of the Mariner R broadcast when the spacecraft was rolling or tumbling out of proper orientation, and its signal was much weaker than the primary antenna's.1
- Mariner 2's predecessor plan was for Mariner R probes to be launched via the Atlas-Agena, because the Atlas-Centaur was not ready in time.1
- Three Mariner R spacecraft were built: two for launching and one to run tests that was also to be used as a spare.1
- The Mariner R's power system was held in two of its six equipment cases, containing switchgear that regulated and transmitted power from 9800 solar cells.1
- The Mariner R's central computer and sequencer acted as the spacecraft's brain, coordinating its activities according to code in its memory banks and a schedule kept by an electronic clock tuned to equipment on Earth.1
- A monopropellant anhydrous hydrazine 225 N rocket motor was mounted at the rear of the Mariner R for course corrections.1
- The Mariner R's nitrogen gas stabilizing system used ten jet nozzles controlled by gyroscopes, Sun sensors, and Earth sensors to keep it oriented toward Earth.1
- Temperature control on the Mariner R was partly passive, using insulated and highly reflective components, and partly active, using louvers to protect the onboard computer case.1
14 more facts in details and parts
- The Mariner R power system used switchgear that regulated and transmitted power from 9800 solar cells to a rechargeable 1000 watt silver-zinc storage battery.3
- A nitrogen gas fueled stabilizing system with ten jet nozzles, controlled by onboard gyroscopes, Sun sensors and Earth sensors, kept Mariner R oriented to communicate with Earth.3
- Mariner R used louvers to actively protect the case carrying its onboard computer from temperature extremes, alongside passive insulated and reflective components.3
- Of the Mariner R spacecraft's design weight, 406 lb (184 kg) was devoted to non-experimental systems such as maneuvering systems, fuel, and communications equipment.1
- Once fully deployed in space, Mariner R stood 12 ft (3.7 m) high and measured 16.5 ft (5.0 m) across with its two solar panel wings extended.1
- The Mariner R carried a 33.3 lb (15.1 kg) rechargeable 1000 watt silver-zinc storage battery.1
- The Mariner R's primary high-gain parabolic antenna was mounted on its underside and kept pointed toward Earth.1
- Fully deployed in space with its two solar panel wings extended, Mariner R was 12 ft (3.7 m) in height and 16.5 ft (5.0 m) across.3
- The main body of the Mariner R spacecraft was hexagonal.3
- The Mariner R rechargeable silver-zinc storage battery weighed 33.3 lb (15.1 kg).3
- The Mariner R spacecraft carried a three-watt transmitter alongside its radio receiver.3
- The fifth case of the Mariner R spacecraft held electronics for digitizing the analog data received by its experiments for transmission.3
- The sixth case of the Mariner R spacecraft carried three gyroscopes that determined its orientation in space.3
- Mariner R mounted small antennas on each of its wings to receive commands from ground stations.3
Look and appearances (1 fact)
- The main body of the Mariner R craft was hexagonal and held six separate cases of electronic and electromechanical equipment.1
Trivia (1 fact)
- When the first Mariners were built, no test chamber existed to simulate the near-Venus solar environment, so their cooling techniques could not be tested before the live mission.1
Mentioned on other pages
5 facts about other subjects name Mariner-R project
- Jet Propulsion Laboratory: NASA accepted a Jet Propulsion Laboratory proposal and the lab began an 11-month crash program to develop the Mariner R spacecraft, so named because it was a Ranger derivative.3
- Jet Propulsion Laboratory: Jet Propulsion Laboratory began an 11-month crash program to develop Mariner R after NASA accepted its proposal.1
- Mariner 2: The Mariner 1 and Mariner 2 spacecraft are sometimes known as the Mariner R missions.1
- Mariner 2: The Mariner R spacecraft, including Mariner 2, weighed within 3 lb (1.4 kg) of its design weight of 447 lb (203 kg).1
- Mariner 1: The Mariner R spacecraft, including Mariner 1, weighed within 3 lb (1.4 kg) of its design weight of 447 lb (203 kg).3
Sources
3 pages the facts on this page were read from
- Mariner 2 en.wikipedia.org
- Mariner program en.wikipedia.org
- Mariner 1 en.wikipedia.org
Facts are short sentences the Trivia Zone knowledge graph read from these pages; Wikipedia text is available under CC BY-SA 4.0 and Wikidata under CC0. Names, classes and links come from Wikidata.