Kristall
Mir space station module
The Kristall module was launched on 31 May 1990 and added to Mir.1 The cancellation of the Buran programme meant the Kristall docking ports were not used for Buran as planned, and were instead used by US Space Shuttles from the 1990s as part of the Shuttle-Mir programme.1 The Kristall module contained furnaces for producing crystals under microgravity conditions, which is the reason for its name.1
A summary made of Kristall's own facts, quoted as read; each sentence cites its source.
Connections
12 linked subjects · 16 links inferred · 9 named together
A link reads subject → relation → subject. Each is stated by a fact (quoted, with its source), taken from Wikidata, or worked out by the knowledge graph's reasoner from the links it was given; inferred links are marked ∴ with the rule behind them.
- stated
- inferred
- named together
- Space Shuttle Object
- (Kristall → used by → Space Shuttle) The cancellation of the Buran programme meant the Kristall docking ports were not used for Buran as planned, and were instead used by US Space Shuttles from the 1990s as part of the Shuttle-Mir programme.1
- Mir Object
- (Kristall → part of → Mir) The Kristall module was launched on 31 May 1990 and added to Mir.1
- (Mir → has part(s) → Kristall) from Wikidata
- Buran programme Concept
- (Kristall → has part(s) → Buran programme) The most obvious features of the Kristall module were its two Androgynous Peripheral Attach System (APAS-89) docking ports, designed to be compatible with the Buran spacecraft.1
- (Buran programme → part of → Kristall) inferred: the other reading of “has part(s)” (above)
- Salyut 5 Object
- (Salyut 5 → carries scientific instrument → Kristall) The German Kristall furnace was used for crystal growth experiments aboard Salyut 5.2
- APAS-89 Concept
- (APAS-89 → part of → Kristall) The APAS-89 docking ports on Kristall were never used in a Buran docking but were useful later during the Shuttle-Mir programme, providing a berthing location for US Space Shuttles.1
- (Kristall → has part(s) → APAS-89) inferred: the other reading of “part of” (above)
- Energia Object
- (Kristall → has part(s) → Energia) inferred: through Buran programme, as “has part(s)” carries over; stated: The most obvious features of the Kristall module were its two Androgynous Peripheral Attach System (APAS-89) docking ports, designed to be compatible with the Buran spacecraft.1
- (Energia → part of → Kristall) inferred: through Buran programme, as “part of” carries over
- RD-170 Object
- (Kristall → has part(s) → RD-170) inferred: through Buran programme, as “has part(s)” carries over; stated: The most obvious features of the Kristall module were its two Androgynous Peripheral Attach System (APAS-89) docking ports, designed to be compatible with the Buran spacecraft.1
- (RD-170 → part of → Kristall) inferred: the other reading of “has part(s)”
- Kerosene Concept
- (Kristall → has part(s) → Kerosene) inferred: through Buran programme, as “has part(s)” carries over; stated: The most obvious features of the Kristall module were its two Androgynous Peripheral Attach System (APAS-89) docking ports, designed to be compatible with the Buran spacecraft.1
- (Kerosene → part of → Kristall) inferred: the other reading of “has part(s)”
- Saturn AL-31 Object
- (Kristall → has part(s) → Saturn AL-31) inferred: through Buran programme, as “has part(s)” carries over; stated: The most obvious features of the Kristall module were its two Androgynous Peripheral Attach System (APAS-89) docking ports, designed to be compatible with the Buran spacecraft.1
- (Saturn AL-31 → part of → Kristall) inferred: the other reading of “has part(s)”
- RD-0120 Object
- (Kristall → has part(s) → RD-0120) inferred: through Buran programme, as “has part(s)” carries over; stated: The most obvious features of the Kristall module were its two Androgynous Peripheral Attach System (APAS-89) docking ports, designed to be compatible with the Buran spacecraft.1
- (RD-0120 → part of → Kristall) inferred: the other reading of “has part(s)”
- RD-120 Object
- (Kristall → has part(s) → RD-120) inferred: through Buran programme, as “has part(s)” carries over; stated: The most obvious features of the Kristall module were its two Androgynous Peripheral Attach System (APAS-89) docking ports, designed to be compatible with the Buran spacecraft.1
- (RD-120 → part of → Kristall) inferred: the other reading of “has part(s)”
- Sofora girder Concept
- (Kristall → part of → Sofora girder) inferred: through Mir, as “part of” carries over; stated: The Kristall module was launched on 31 May 1990 and added to Mir.1
- (Sofora girder → has part(s) → Kristall) inferred: through Mir, as “has part(s)” carries over
Named together
Subjects that share a fact with Kristall, with no typed link between them yet.
- Space Shuttle orbiter 1 shared fact
- Visiting Space Shuttle orbiters initially docked directly to Kristall, which required relocating the module to keep the shuttle clear of Mir's solar arrays.1
- Soyuz TM-17 2 shared facts
- During the Soyuz TM-17 undocking, the spacecraft struck Mir a glancing blow due to an error in setting up the control system, scratching the exterior of Kristall.1
- Soyuz TM-16 2 shared facts
- Soyuz TM-16 was equipped with an APAS-89 docking system rather than the usual probe-and-drogue, enabling it to dock to Kristall and test the port later used by US Space Shuttles.1
- Mir Docking Module 2 shared facts
- The Mir Docking Module was attached to Kristall's docking port, so the Kristall relocation procedure was not needed on further missions.3
- STS-71 1 shared fact
- The clearance problem with Mir's solar arrays had been overcome during STS-71 by relocating the station's Kristall module to a different location.3
- Androgynous Peripheral Attach System 1 shared fact
- The Kristall module carried two APAS-89 docking ports designed to be compatible with the shuttle.1
- Lyappa arm 1 shared fact
- Kvant-2, Kristall, Spektr and Priroda were each equipped with one Lyappa arm, a robotic arm that grappled a fixture on the core module's docking node after docking.1
- Mir EO-6 1 shared fact
- EO-6 was extended by 10 days because of the delay in docking Kristall, to permit activation of the module's systems and an EVA to repair the loose thermal blankets on Soyuz TM-9.1
- Shuttle-Mir programme 1 shared fact
- The cancellation of the Buran programme meant the Kristall docking ports were not used for Buran as planned, and were instead used by US Space Shuttles from the 1990s as part of the Shuttle-Mir programme.1
Kristall: facts
6 facts in 2 categories · rated most surprising
Events (2 facts)
Details and parts (4 facts)
- The Kristall module contained furnaces for producing crystals under microgravity conditions, which is the reason for its name.1
- The most obvious features of the Kristall module were its two Androgynous Peripheral Attach System (APAS-89) docking ports, designed to be compatible with the Buran spacecraft.1
- The Kristall module carried two APAS-89 docking ports designed to be compatible with the shuttle.1
- The Kristall module was equipped with biotechnology research equipment, including a small greenhouse for plant cultivation experiments.1
Mentioned on other pages
14 facts about other subjects name Kristall
- STS-71: The clearance problem with Mir's solar arrays had been overcome during STS-71 by relocating the station's Kristall module to a different location.3
- APAS-89: The APAS-89 docking ports on Kristall were never used in a Buran docking but were useful later during the Shuttle-Mir programme, providing a berthing location for US Space Shuttles.1
- Soyuz TM-16: Soyuz TM-16 was equipped with an APAS-89 docking system rather than the usual probe-and-drogue, enabling it to dock to Kristall and test the port later used by US Space Shuttles.1
- Soyuz TM-17: During the Soyuz TM-17 undocking, the spacecraft struck Mir a glancing blow due to an error in setting up the control system, scratching the exterior of Kristall.1
- Mir Docking Module: The Mir Docking Module was attached to Kristall's docking port, so the Kristall relocation procedure was not needed on further missions.3
- Salyut 5: The German Kristall furnace was used for crystal growth experiments aboard Salyut 5.2
- Lyappa arm: Kvant-2, Kristall, Spektr and Priroda were each equipped with one Lyappa arm, a robotic arm that grappled a fixture on the core module's docking node after docking.1
- Mir EO-6: EO-6 was extended by 10 days because of the delay in docking Kristall, to permit activation of the module's systems and an EVA to repair the loose thermal blankets on Soyuz TM-9.1
- Soyuz TM-17: The Soyuz TM-17 undocking was unusual because the spacecraft was to pass along Kristall to photograph the APAS for training space shuttle pilots.1
- Soyuz TM-16: The Soyuz TM-16 was specially modified and tested the Kristall docking ports in 1993 before shuttle use.1
- Space Shuttle orbiter: Visiting Space Shuttle orbiters initially docked directly to Kristall, which required relocating the module to keep the shuttle clear of Mir's solar arrays.1
- Mir Docking Module: A Mir Docking Module was later added to the end of Kristall so that the module need not be moved and solar arrays need not be retracted for clearance.1
- Mir: Several repurposed TKS spacecraft were adapted into permanent Mir modules, including Kvant-2, Kristall, Spektr and Priroda.4
- APAS-89: The APAS-89 docking collar was launched as part of the Kristall module of the Soviet Mir space station.5
Sources
5 pages the facts on this page were read from
- Mir en.wikipedia.org
- Salyut 5 en.wikipedia.org
- Shuttle–Mir program en.wikipedia.org
- TKS (spacecraft) en.wikipedia.org
- Apollo–Soyuz en.wikipedia.org
Facts are short sentences the Trivia Zone knowledge graph read from these pages; Wikipedia text is available under CC BY-SA 4.0 and Wikidata under CC0. Names, classes and links come from Wikidata.