Trivia ZoneEncyclopedia
  1. Home
  2. Space exploration
  3. Concepts

Canadarm

Robotic arm used on Space Shuttles

  • Concept
  • 9 facts
  • 9 sources
  • Updated
  • Summary from facts

The Canadarm was used on the Space Shuttle, and Canadarm2 was used on the International Space Station.1 Endeavour's Canadarm was removed after the orbiter's decommissioning so it could be sent to the John H. Chapman Space Centre in Longueuil, Quebec.2 The Remote Manipulator System, also known as Canadarm, was built by the Canadian company Spar Aerospace.3

A summary made of Canadarm's own facts, quoted as read; each sentence cites its source.

Connections

11 linked subjects · 17 links inferred · 11 named together

A link reads subject → relation → subject. Each is stated by a fact (quoted, with its source), taken from Wikidata, or worked out by the knowledge graph's reasoner from the links it was given; inferred links are marked ∴ with the rule behind them.

Canadarm and 10 of its closest connectionsSpace Shuttle · has part(s) · Space Shuttle EndeavourSpace Shuttle · has part(s) · Orbiter Boom Sensor SystemSpace Shuttle · part of · Human spaceflightSpace Shuttle · part of · Space Shuttle programSpace Shuttle · has part(s) · Space Shuttle orbiterSpace Shuttle · has part(s) · Orbital Maneuvering SystemSpace Shuttle Endeavour · has part(s) · Orbiter Boom Sensor SystemSpace Shuttle Endeavour · part of · Human spaceflightSpace Shuttle Endeavour · part of · Space Shuttle programSpace Shuttle Endeavour · instance of · Space Shuttle orbiterSpace Shuttle Endeavour · part of · Orbital Maneuvering SystemOrbiter Boom Sensor System · part of · Human spaceflightOrbiter Boom Sensor System · part of · Space Shuttle programOrbiter Boom Sensor System · part of · Space Shuttle orbiterOrbiter Boom Sensor System · part of · Orbital Maneuvering SystemHuman spaceflight · has part(s) · Space Shuttle programHuman spaceflight · has part(s) · Space Shuttle orbiterHuman spaceflight · has part(s) · Orbital Maneuvering SystemSpace Shuttle program · has part(s) · Space Shuttle orbiterSpace Shuttle program · has part(s) · Orbital Maneuvering SystemSpace Shuttle orbiter · part of · Orbital Maneuvering SystemSpace ShuttleSpace Shuttle End…Orbiter Boom Sen…Canada Aviation…Spar AerospaceJupiterHuman spaceflightSpace Shuttle pr…Space Shuttle or…Orbital Maneuveri…
Point at a subject to see how it links to Canadarm.
  • stated
  • inferred
  • named together
  • Space Shuttle Object
    • (Canadarm → part of → Space Shuttle) The Space Shuttle orbiters were equipped with a 15.2 metre (50 ft) CanadaArm1, an upgraded version of which is used on the International Space Station.5
    • (Space Shuttle → has part(s) → Canadarm) inferred: the other reading of “part of” (above)
    • (Canadarm → part of → Space Shuttle Endeavour) Endeavour's Canadarm was removed after the orbiter's decommissioning so it could be sent to the John H. Chapman Space Centre in Longueuil, Quebec.2 and 1 more fact
    • (Space Shuttle Endeavour → has part(s) → Canadarm) inferred: the other reading of “part of” (above)
  • Orbiter Boom Sensor System Concept
    • (Orbiter Boom Sensor System → derived from → Canadarm) The Orbiter Boom Sensor System was an extension of the original Canadarm used to inspect the Space Shuttle's thermal protection system for damage while in orbit.1
    • (Orbiter Boom Sensor System → part of → Canadarm) The Orbiter Boom Sensor System, a camera on the end of the Canadarm, was added to let the crew inspect the orbiter for tile damage once they reached orbit.6
    • (Canadarm → has part(s) → Orbiter Boom Sensor System) inferred: the other reading of “part of” (above)
    • (Canadarm → source of → Orbiter Boom Sensor System) inferred: the other reading of “derived from” (above)
    • (Orbiter Boom Sensor System → influenced by → Canadarm) inferred: implied by “derived from” (above)
  • Canada Aviation and Space Museum Place
    • (Canadarm → located in → Canada Aviation and Space Museum) Endeavour's Canadarm, originally built by Spar Aerospace, has since gone on permanent display at the Canada Aviation and Space Museum in Ottawa.2
  • Spar Aerospace Organization
    • (Spar Aerospace → product or material produced → Canadarm) Endeavour's Canadarm, originally built by Spar Aerospace, has since gone on permanent display at the Canada Aviation and Space Museum in Ottawa.2
  • Jupiter Object
    • (Jupiter → derived from → Canadarm) Lockheed Martin's proposed Jupiter would have included a robotic arm based on Canadarm technology.7
    • (Canadarm → source of → Jupiter) inferred: the other reading of “derived from” (above)
    • (Jupiter → influenced by → Canadarm) inferred: implied by “derived from” (above)
    • (Canadarm → part of → Human spaceflight) inferred: the other reading of “has part(s)”
    • (Human spaceflight → has part(s) → Canadarm) inferred: the other reading of “part of”
    • (Canadarm → part of → Space Shuttle program) inferred: the other reading of “has part(s)”
    • (Space Shuttle program → has part(s) → Canadarm) inferred: the other reading of “part of”
    • (Canadarm → part of → Space Shuttle orbiter) inferred: through Orbital Maneuvering System, as “part of” carries over; stated: Two Orbital Maneuvering System thrusters were mounted in two separate removable pods on the orbiter's aft fuselage.8
    • (Space Shuttle orbiter → has part(s) → Canadarm) inferred: the other reading of “part of”
  • Orbital Maneuvering System Object
    • (Canadarm → part of → Orbital Maneuvering System) inferred: through Space Shuttle Endeavour, as “part of” carries over; stated: Endeavour's Canadarm was removed after the orbiter's decommissioning so it could be sent to the John H. Chapman Space Centre in Longueuil, Quebec.2
    • (Orbital Maneuvering System → has part(s) → Canadarm) inferred: the other reading of “part of”
  • California Science Center Place
    • (Canadarm → part of → California Science Center) inferred: through Space Shuttle Endeavour, as “part of” carries over; stated: Endeavour's Canadarm was removed after the orbiter's decommissioning so it could be sent to the John H. Chapman Space Centre in Longueuil, Quebec.2
    • (California Science Center → has part(s) → Canadarm) inferred: the other reading of “part of”

Named together

Subjects that share a fact with Canadarm, with no typed link between them yet.

    • The Canadarm was used on the Space Shuttle, and Canadarm2 was used on the International Space Station.1
  • Japan 1 shared fact
    • Japan's Remote Manipulator System was launched on STS-124 and is attached to the Kibō Pressurised Module.4
  • Hubble Space Telescope 1 shared fact
    • Hubble servicing missions retrieved the telescope with the shuttle's mechanical arm.9
  • Canadian Space Agency 1 shared fact
    • In a Canadian poll on which museum should display the Canadarm, the Canadian Space Agency's headquarters placed third to last with only 35 of 638 votes.2
  • Ottawa 1 shared fact
    • Endeavour's Canadarm, originally built by Spar Aerospace, has since gone on permanent display at the Canada Aviation and Space Museum in Ottawa.2
  • Quebec 1 shared fact
    • Endeavour's Canadarm was removed after the orbiter's decommissioning so it could be sent to the John H. Chapman Space Centre in Longueuil, Quebec.2
  • Longueuil 1 shared fact
    • Endeavour's Canadarm was removed after the orbiter's decommissioning so it could be sent to the John H. Chapman Space Centre in Longueuil, Quebec.2
  • STS-124 1 shared fact
    • Japan's Remote Manipulator System was launched on STS-124 and is attached to the Kibō Pressurised Module.4
  • STS-27 1 shared fact
    • On the second day of the STS-27 flight, the crew inspected the damage using a camera on the remote manipulator system.6
  • John H. Chapman Space Centre 1 shared fact
    • Endeavour's Canadarm was removed after the orbiter's decommissioning so it could be sent to the John H. Chapman Space Centre in Longueuil, Quebec.2
  • Canadarm2 1 shared fact
    • The Canadarm was used on the Space Shuttle, and Canadarm2 was used on the International Space Station.1

Canadarm: facts

9 facts in 4 categories · rated most surprising

Making and creation (1 fact)

  • The Remote Manipulator System, also known as Canadarm, was built by the Canadian company Spar Aerospace.3

Places (2 facts)

  • Endeavour's Canadarm was removed after the orbiter's decommissioning so it could be sent to the John H. Chapman Space Centre in Longueuil, Quebec.2
  • Endeavour's Canadarm, originally built by Spar Aerospace, has since gone on permanent display at the Canada Aviation and Space Museum in Ottawa.2

By the numbers (2 facts)

  • The original Remote Manipulator System could deploy or retrieve payloads up to 29,000 kg (65,000 lb).3
  • The Remote Manipulator System's capacity was later improved to 270,000 kg (586,000 lb).3

Details and parts (4 facts)

  • The Canadarm was used on the Space Shuttle, and Canadarm2 was used on the International Space Station.1
  • Japan's Remote Manipulator System was launched on STS-124 and is attached to the Kibō Pressurised Module.4
  • The Space Shuttle orbiters were equipped with a 15.2 metre (50 ft) CanadaArm1, an upgraded version of which is used on the International Space Station.5
  • The Remote Manipulator System was controlled by an astronaut inside the orbiter's flight deck using windows and closed-circuit television.3

Mentioned on other pages

7 facts about other subjects name Canadarm

  • Canadian Space Agency: In a Canadian poll on which museum should display the Canadarm, the Canadian Space Agency's headquarters placed third to last with only 35 of 638 votes.2
  • Orbiter Boom Sensor System: The Orbiter Boom Sensor System was an extension of the original Canadarm used to inspect the Space Shuttle's thermal protection system for damage while in orbit.1
  • Hubble Space Telescope: Hubble servicing missions retrieved the telescope with the shuttle's mechanical arm.9
  • STS-27: On the second day of the STS-27 flight, the crew inspected the damage using a camera on the remote manipulator system.6
  • Orbiter Boom Sensor System: The Orbiter Boom Sensor System, a camera on the end of the Canadarm, was added to let the crew inspect the orbiter for tile damage once they reached orbit.6
  • Jupiter: Lockheed Martin's proposed Jupiter would have included a robotic arm based on Canadarm technology.7
  • Space Shuttle: The Space Shuttle aft flight deck contained an RHC to control the Remote Manipulator System during cargo operations.3

Sources

9 pages the facts on this page were read from

  1. Canadian Space Agency en.wikipedia.org
  2. Space Shuttle Endeavour en.wikipedia.org
  3. Space Shuttle en.wikipedia.org
  4. International Space Station en.wikipedia.org
  5. Spacecraft en.wikipedia.org
  6. Space Shuttle Columbia disaster en.wikipedia.org
  7. Commercial Resupply Services en.wikipedia.org
  8. Space Shuttle orbiter en.wikipedia.org
  9. Hubble Space Telescope en.wikipedia.org

Facts are short sentences the Trivia Zone knowledge graph read from these pages; Wikipedia text is available under CC BY-SA 4.0 and Wikidata under CC0. Names, classes and links come from Wikidata.