Apollo Guidance Computer
Computer
The Apollo Guidance Computer was the first computer based on silicon integrated circuits.1 The Apollo Guidance Computer's performance was comparable to the first generation of home computers from the 1970s, such as the Kenbak-1, Apple II, TRS-80, and Commodore PET.1 The Apollo Guidance Computer's Sbank, or super-bank, was a 1-bit extension to Fbank, required because the last 4 kilowords of its 36-kiloword ROM could not be reached using Fbank alone.1
A summary made of Apollo Guidance Computer's own facts, quoted as read; each sentence cites its source.
Connections
48 linked subjects · 66 links inferred · 32 named together
A link reads subject → relation → subject. Each is stated by a fact (quoted, with its source), taken from Wikidata, or worked out by the knowledge graph's reasoner from the links it was given; inferred links are marked ∴ with the rule behind them.
- stated
- inferred
- named together
- Apollo program Concept
- (Apollo Guidance Computer → used by → Apollo program) The Apollo Guidance Computer and its DSKY user interface were developed in the early 1960s for the Apollo program by the MIT Instrumentation Laboratory.1 and 1 more fact
- (Apollo program → has part(s) → Apollo Guidance Computer) The flight computer design used in both the lunar and command modules was, along with the Polaris and Minuteman missile systems, the driving force behind early research into integrated circuits.6 and 1 more fact
- (Apollo Guidance Computer → part of → Apollo program) inferred: the other reading of “has part(s)” (above)
- Margaret Hamilton Person
- (Apollo Guidance Computer → director / manager → Margaret Hamilton) Details of the Apollo Guidance Computer programs were implemented by a team under the direction of Margaret Hamilton.1
- (Margaret Hamilton → notable work → Apollo Guidance Computer) from Wikidata
- (Apollo Guidance Computer → significant person → Margaret Hamilton) inferred: implied by “director / manager” (above)
- Apollo 1 Place
- (Apollo Guidance Computer → located in → Apollo 1) Block I of the Apollo Guidance Computer was on board the ill-fated Apollo 1.1
-
- (Apollo command and service module → has part(s) → Apollo Guidance Computer) The lower equipment bay of the command module housed the Guidance and Navigation computer, sextant, telescope, and Inertial Measurement Unit.7
- (Apollo Guidance Computer → part of → Apollo command and service module) from Wikidata
- DSKY Concept
- (Apollo Guidance Computer → has part(s) → DSKY) The user interface to the Apollo Guidance Computer was called the DSKY, standing for display and keyboard.1
- (DSKY → part of → Apollo Guidance Computer) inferred: the other reading of “has part(s)” (above)
- Silicon Object
- (Apollo Guidance Computer → derived from → Silicon) The Apollo Guidance Computer was the first computer based on silicon integrated circuits.1
- (Apollo Guidance Computer → influenced by → Silicon) inferred: implied by “derived from” (above)
- (Silicon → source of → Apollo Guidance Computer) inferred: the other reading of “derived from” (above)
- Integrated circuit Place
- (Apollo Guidance Computer → derived from → Integrated circuit) The Apollo Guidance Computer was the first computer based on silicon integrated circuits.1
- (Apollo Guidance Computer → influenced by → Integrated circuit) inferred: implied by “derived from” (above)
- (Integrated circuit → source of → Apollo Guidance Computer) inferred: the other reading of “derived from” (above)
- Raytheon Organization
- (Raytheon → product or material produced → Apollo Guidance Computer) The flight hardware of the Apollo Guidance Computer was fabricated by Raytheon.1 and 1 more fact
- Magnetic-core memory Object
- (Apollo Guidance Computer → has part(s) → Magnetic-core memory) The Apollo Guidance Computer had a small amount of read/write core memory.1
- (Apollo Guidance Computer → storage device → Magnetic-core memory) from Wikidata
- (Magnetic-core memory → part of → Apollo Guidance Computer) inferred: the other reading of “has part(s)” (above)
- Program counter Concept
- (Apollo Guidance Computer → has part(s) → Program counter) The Apollo Guidance Computer's central registers included an accumulator, a program counter, a remainder and return address register Q, and a lower product register L.1
- (Program counter → part of → Apollo Guidance Computer) inferred: the other reading of “has part(s)” (above)
- Accumulator Concept
- (Apollo Guidance Computer → has part(s) → Accumulator) The Apollo Guidance Computer's central registers included an accumulator, a program counter, a remainder and return address register Q, and a lower product register L.1 and 1 more fact
- (Accumulator → part of → Apollo Guidance Computer) inferred: the other reading of “has part(s)” (above)
- Charles Stark Draper Person
- (Apollo Guidance Computer → designed by → Charles Stark Draper) The Apollo Guidance Computer was designed at the MIT Instrumentation Laboratory under Charles Stark Draper.1
- (Apollo Guidance Computer → creator → Charles Stark Draper) inferred: implied by “designed by” (above)
Show 36 more connections
- Draper Laboratory Organization
- (Apollo Guidance Computer → developer → Draper Laboratory) The Apollo Guidance Computer and its DSKY user interface were developed in the early 1960s for the Apollo program by the MIT Instrumentation Laboratory.1
- (Apollo Guidance Computer → creator → Draper Laboratory) inferred: implied by “developer” (above)
- J. Halcombe Laning Person
- (Apollo Guidance Computer → designed by → J. Halcombe Laning) The Apollo Guidance Computer's real-time operating system was designed by J. Halcombe Laning and included the Exec, a batch job-scheduling system using cooperative multi-tasking, and the Waitlist, an interrupt-driven pre-emptive scheduler for timer-driven tasks.1
- (Apollo Guidance Computer → creator → J. Halcombe Laning) inferred: implied by “designed by” (above)
- Eldon C. Hall Person
- (Apollo Guidance Computer → designed by → Eldon C. Hall) Hardware design of the Apollo Guidance Computer was led by Eldon C. Hall.1
- (Apollo Guidance Computer → creator → Eldon C. Hall) inferred: implied by “designed by” (above)
- B register Concept
- (Apollo Guidance Computer → has part(s) → B register) At the start of the next instruction, the upper bits of the Apollo Guidance Computer's B register were copied to SQ, and the lower bits were copied to S.1 and 1 more fact
- (B register → part of → Apollo Guidance Computer) inferred: the other reading of “has part(s)” (above)
- Block II spacecraft Concept
- (Apollo Guidance Computer → part of → Block II spacecraft) The Block II Apollo Guidance Computer delivered the correctly signed remainder of a double-precision division in register L, which considerably simplified the double-precision division subroutine.1
- (Block II spacecraft → has part(s) → Apollo Guidance Computer) inferred: the other reading of “part of” (above)
- CCS Concept
- (CCS → part of → Apollo Guidance Computer) The Apollo Guidance Computer's CCS instruction created CCS-holes when the tested value was known to never be positive, which occurred more often than one might suppose.1 and 1 more fact
- (Apollo Guidance Computer → has part(s) → CCS) inferred: the other reading of “part of” (above)
- EDRUPT Concept
- (EDRUPT → part of → Apollo Guidance Computer) The EDRUPT instruction of the Block II Apollo Guidance Computer is a contraction of Ed's Interrupt, named after Ed Smally, the programmer who requested it.1
- (Apollo Guidance Computer → has part(s) → EDRUPT) inferred: the other reading of “part of” (above)
- Fbank register Concept
- (Apollo Guidance Computer → has part(s) → Fbank register) The Apollo Guidance Computer had a 5-bit ROM bank register called Bank or Fbank, used to select the 1-kiloword ROM bank when addressing in the fixed-switchable mode.1
- (Fbank register → part of → Apollo Guidance Computer) inferred: the other reading of “has part(s)” (above)
- INDEX Concept
- (Apollo Guidance Computer → has part(s) → INDEX) In the Apollo Guidance Computer, the INDEX instruction could add or subtract an index value to the base address specified by the operand of the following instruction.1
- (INDEX → part of → Apollo Guidance Computer) inferred: the other reading of “has part(s)” (above)
- RESUME Concept
- (RESUME → part of → Apollo Guidance Computer) In the Apollo Guidance Computer, the RESUME instruction was a special instance of INDEX and was used to return from interrupts.1
- (Apollo Guidance Computer → has part(s) → RESUME) inferred: the other reading of “part of” (above)
- S register Concept
- (Apollo Guidance Computer → has part(s) → S register) The Apollo Guidance Computer had a 12-bit memory address register called S, which holds the lower portion of the memory address.1
- (S register → part of → Apollo Guidance Computer) inferred: the other reading of “has part(s)” (above)
- TS Concept
- (TS → part of → Apollo Guidance Computer) In the Apollo Guidance Computer, the TS instruction detected and corrected overflows in a way that propagated a carry for multi-precision add and subtract.1
- (Apollo Guidance Computer → has part(s) → TS) inferred: the other reading of “part of” (above)
- Apollo Lunar Module Object
- (Apollo Guidance Computer → part of → Apollo Lunar Module) from Wikidata
- (Apollo Lunar Module → has part(s) → Apollo Guidance Computer) inferred: the other reading of “part of” (from Wikidata)
- Assembly language Group
- (Apollo Guidance Computer → programmed in → Assembly language) from Wikidata
- Core rope memory Concept
- (Apollo Guidance Computer → storage device → Core rope memory) from Wikidata
- Verb Concept
- (Apollo Guidance Computer → has part(s) → Verb) inferred: through DSKY, as “has part(s)” carries over; stated: The user interface to the Apollo Guidance Computer was called the DSKY, standing for display and keyboard.1
- (Verb → part of → Apollo Guidance Computer) inferred: the other reading of “has part(s)”
- Apollo 11 Place
- (Apollo Guidance Computer → part of → Apollo 11) inferred: through Apollo Lunar Module, as “part of” carries over
- (Apollo 11 → has part(s) → Apollo Guidance Computer) inferred: the other reading of “part of”
- Space Race Event
- (Apollo Guidance Computer → part of → Space Race) inferred: through Apollo program, as “part of” carries over; stated: According to The Economist, Apollo achieved President Kennedy's goal of taking on the Soviet Union in the Space Race by demonstrating the superiority of the free-market system.6
- (Space Race → has part(s) → Apollo Guidance Computer) inferred: through Apollo program, as “has part(s)” carries over; stated: The flight computer design used in both the lunar and command modules was, along with the Polaris and Minuteman missile systems, the driving force behind early research into integrated circuits.6
- Apollo 13 Place
- (Apollo Guidance Computer → part of → Apollo 13) inferred: through Apollo command and service module, as “part of” carries over
- (Apollo 13 → has part(s) → Apollo Guidance Computer) inferred: through Apollo command and service module, as “has part(s)” carries over; stated: Apollo 13 used a free-return trajectory due to an oxygen tank explosion in the command and service module en route to the Moon.8
- Skylab Object
- (Apollo Guidance Computer → part of → Skylab) inferred: through Apollo command and service module, as “part of” carries over
- (Skylab → has part(s) → Apollo Guidance Computer) inferred: through Apollo command and service module, as “has part(s)” carries over; stated: The lower equipment bay of the command module housed the Guidance and Navigation computer, sextant, telescope, and Inertial Measurement Unit.7
- Apollo 17 Place
- (Apollo Guidance Computer → part of → Apollo 17) inferred: through Apollo command and service module, as “part of” carries over
- (Apollo 17 → has part(s) → Apollo Guidance Computer) inferred: through Apollo command and service module, as “has part(s)” carries over; stated: The crew executed the first mid-course correction on the third day of the Apollo 17 mission, a two-second burn of the service propulsion engine.9
- Saturn V Object
- (Apollo Guidance Computer → part of → Saturn V) inferred: through Apollo Lunar Module, as “part of” carries over
- (Saturn V → has part(s) → Apollo Guidance Computer) inferred: the other reading of “part of”
- Apollo 12 Place
- (Apollo Guidance Computer → part of → Apollo 12) inferred: through Apollo Lunar Module, as “part of” carries over
- (Apollo 12 → has part(s) → Apollo Guidance Computer) inferred: the other reading of “part of”
- Apollo 10 Place
- (Apollo Guidance Computer → part of → Apollo 10) inferred: through Apollo command and service module, as “part of” carries over
- (Apollo 10 → has part(s) → Apollo Guidance Computer) inferred: through Apollo command and service module, as “has part(s)” carries over; stated: The call signs for Apollo 10 were the names of the Peanuts characters Charlie Brown for the Command and Service Module and Snoopy for the Lunar Module.10
- Apollo 9 Place
- (Apollo Guidance Computer → part of → Apollo 9) inferred: through Apollo command and service module, as “part of” carries over
- (Apollo 9 → has part(s) → Apollo Guidance Computer) inferred: through Apollo command and service module, as “has part(s)” carries over; stated: Apollo 9 used the name Gumdrop for its Command Module and Spider for its Lunar Module.11
- Human spaceflight Object
- (Apollo Guidance Computer → part of → Human spaceflight) inferred: the other reading of “has part(s)”
- (Human spaceflight → has part(s) → Apollo Guidance Computer) inferred: through Apollo program, as “has part(s)” carries over; stated: Human spaceflight programs include the Soyuz, Shenzhou, the past Apollo Moon landing and the Space Shuttle programs.12
- Saturn IB Object
- (Apollo Guidance Computer → part of → Saturn IB) inferred: through Apollo Lunar Module, as “part of” carries over
- (Saturn IB → has part(s) → Apollo Guidance Computer) inferred: the other reading of “part of”
- Apollo Work
- (Apollo Guidance Computer → part of → Apollo) inferred: through Apollo command and service module, as “part of” carries over; stated: The Apollo command and service module was one of two principal components of the United States Apollo spacecraft.7
- (Apollo → has part(s) → Apollo Guidance Computer) inferred: through Apollo command and service module, as “has part(s)” carries over; stated: The expendable Apollo spacecraft consisted of a combined command and service module and an Apollo Lunar Module.13
- Saturn Object
- (Apollo Guidance Computer → part of → Saturn) inferred: through Apollo Lunar Module, as “part of” carries over
- (Saturn → has part(s) → Apollo Guidance Computer) inferred: the other reading of “part of”
- Rocketdyne F-1 Object
- (Apollo Guidance Computer → part of → Rocketdyne F-1) inferred: through Apollo Lunar Module, as “part of” carries over
- (Rocketdyne F-1 → has part(s) → Apollo Guidance Computer) inferred: the other reading of “part of”
- S-IVB Object
- (Apollo Guidance Computer → part of → S-IVB) inferred: through Apollo Lunar Module, as “part of” carries over; stated: The Apollo Lunar Module sat beneath the command and service module with its legs folded, inside the Spacecraft-to-LM adapter attached to the S-IVB third stage of the Saturn V rocket at launch.4
- (S-IVB → has part(s) → Apollo Guidance Computer) inferred: the other reading of “part of”
- S-IC Object
- (Apollo Guidance Computer → part of → S-IC) inferred: through Apollo Lunar Module, as “part of” carries over
- (S-IC → has part(s) → Apollo Guidance Computer) inferred: the other reading of “part of”
- Apollo Applications Program Concept
- (Apollo Guidance Computer → part of → Apollo Applications Program) inferred: through Apollo 10, as “part of” carries over; stated: Apollo X was a study presented in August 1964 by the Manned Spacecraft Center for an expendable lab, short for Apollo Extension System.14
- (Apollo Applications Program → has part(s) → Apollo Guidance Computer) inferred: the other reading of “part of”
- 16 mm Data Acquisition Camera Concept
- (Apollo Guidance Computer → part of → 16 mm Data Acquisition Camera) inferred: through Apollo command and service module, as “part of” carries over
- (16 mm Data Acquisition Camera → has part(s) → Apollo Guidance Computer) inferred: through Apollo command and service module, as “has part(s)” carries over; stated: The lower equipment bay of the command module housed the Guidance and Navigation computer, sextant, telescope, and Inertial Measurement Unit.7
- AS-203 Object
- (Apollo Guidance Computer → part of → AS-203) inferred: through Apollo Lunar Module, as “part of” carries over
- (AS-203 → has part(s) → Apollo Guidance Computer) inferred: the other reading of “part of”
- San Diego Air & Space Museum Place
- (Apollo Guidance Computer → part of → San Diego Air & Space Museum) inferred: the other reading of “has part(s)”
- (San Diego Air & Space Museum → has part(s) → Apollo Guidance Computer) inferred: the other reading of “part of”
Named together
Subjects that share a fact with Apollo Guidance Computer, with no typed link between them yet.
- Buzz Aldrin 5 shared facts
- The Apollo Guidance Computer has been called "The fourth astronaut" for its role in helping the three astronauts who relied on it: Neil Armstrong, Buzz Aldrin and Michael Collins.1
- Jim Lovell 4 shared facts
- Lovell accidentally erased some of the Apollo Guidance Computer's memory, which left the inertial measurement unit with data showing the module was in its pre-lift-off orientation, so the unit fired thrusters to 'correct' the module's attitude.15
- Space Shuttle 2 shared facts
- The Apollo Guidance Computer software influenced the design of Skylab, Space Shuttle and early fly-by-wire fighter aircraft systems.1
- Apollo 5 2 shared facts
- After Apollo 5 reached orbit and the Apollo Lunar Module separated from the S-IVB booster, the Apollo Guidance Computer automatically aborted a planned burn after detecting the craft was not going as fast as planned.2
- Neil Armstrong 1 shared fact
- The Apollo Guidance Computer has been called "The fourth astronaut" for its role in helping the three astronauts who relied on it: Neil Armstrong, Buzz Aldrin and Michael Collins.1
- NASA 1 shared fact
- The onboard Apollo Guidance Computer systems were secondary, as NASA conducted primary navigation with mainframe computers in Houston.1
- Michael Collins 1 shared fact
- The Apollo Guidance Computer has been called "The fourth astronaut" for its role in helping the three astronauts who relied on it: Neil Armstrong, Buzz Aldrin and Michael Collins.1
- Apollo 8 1 shared fact
- The Apollo 8 crew had to reenter data into the computer to tell it the module's actual orientation after realizing why the computer had changed the attitude.15
- Apollo 14 1 shared fact
- Most of the Apollo Guidance Computer software was on read-only rope memory and could not be changed in operation, but some key parts were in read-write magnetic-core memory that astronauts could overwrite using the DSKY interface, as was done on Apollo 14.1
- Apollo 7 1 shared fact
- The Apollo 7 crew trained on the Apollo Guidance Computer at the Massachusetts Institute of Technology.16
- David Scott 1 shared fact
- David Scott's initial NASA assignment was as an astronaut representative at MIT supervising development of the Apollo Guidance Computer.17
- Charles Duke 1 shared fact
- CAPCOM Charles Duke told the crew from Houston that the 1202 and 1201 alarms were caused by executive overflows in the lunar module guidance computer and were not a concern.18
- Apollo 4 1 shared fact
- Block I of the Apollo Guidance Computer was used during the uncrewed Apollo 4 and Apollo 6 flights.1
- Apollo 6 1 shared fact
- Block I of the Apollo Guidance Computer was used during the uncrewed Apollo 4 and Apollo 6 flights.1
- SQ register 2 shared facts
- At the start of the next instruction, the upper bits of the Apollo Guidance Computer's B register were copied to SQ, and the lower bits were copied to S.1
- Software engineering 1 shared fact
- The design principles developed for the Apollo Guidance Computer by the MIT Instrumentation Laboratory, directed in the late 1960s by Charles Draper, became foundational to software engineering.1
Also named with Apollo Guidance Computer: Sextant, De Morgan's laws, Apple II, Parity bit, Vought F-8 Crusader, Commodore PET, LGM-30 Minuteman, United States customary units, Fairchild Semiconductor, TRS-80, Fixed-point arithmetic, Magnetic core, Synchro, Kenbak-1, Base address, Ron Burkey.
Apollo Guidance Computer: facts
123 facts in 9 categories · rated most surprising
What it is (2 facts)
Making and creation (13 facts)
- The Apollo Guidance Computer performed a logical AND using De Morgan's theorem, by inverting both operands, performing a logical OR through the bus, and inverting the result, because it had no native ability to do a logical AND.1
- Most of the Apollo Guidance Computer software was on read-only rope memory and could not be changed in operation, but some key parts were in read-write magnetic-core memory that astronauts could overwrite using the DSKY interface, as was done on Apollo 14.1
- The Apollo Guidance Computer formed the basis of an experimental fly-by-wire system installed into an F-8 Crusader to demonstrate the practicality of computer-driven fly-by-wire.1
- The Apollo Guidance Computer and its DSKY user interface were developed in the early 1960s for the Apollo program by the MIT Instrumentation Laboratory.1
- The Apollo Guidance Computer was designed at the MIT Instrumentation Laboratory under Charles Stark Draper.1
- The Apollo Guidance Computer's real-time operating system was designed by J. Halcombe Laning and included the Exec, a batch job-scheduling system using cooperative multi-tasking, and the Waitlist, an interrupt-driven pre-emptive scheduler for timer-driven tasks.1
- The Apollo Guidance Computer's software interpreter, developed by the MIT Instrumentation Laboratory, implemented a virtual machine with more complex pseudo-instructions than the native AGC.1
- When the Apollo Guidance Computer design requirements were defined, the necessary software and programming techniques did not exist, so they had to be designed from scratch.1
5 more facts in making and creation
- Research done on the Apollo Guidance Computer program led to the development of fly-by-wire systems for the Space Shuttle.1
- Hardware design of the Apollo Guidance Computer was led by Eldon C. Hall.1
- The flight hardware of the Apollo Guidance Computer was fabricated by Raytheon.1
- Apollo Guidance Computer software was written in AGC assembly language and stored on rope memory.1
- A Block II version of the Apollo Guidance Computer was designed in 1966.1
Events (9 facts)
- After Apollo 5 reached orbit and the Apollo Lunar Module separated from the S-IVB booster, the Apollo Guidance Computer automatically aborted a planned burn after detecting the craft was not going as fast as planned.2
- The cause of the 1202 and 1201 alarms during Apollo 11's lunar descent was a rapid stream of spurious cycle steals from the rendezvous radar, which had been left on standby in case it was needed for an abort.1
- The alarms were caused by a flawed interface control document between the PGNCS and the ATCA, which failed to specify phase synchronization between two 800 Hz signals.1
- Engineers decided it was safer to fly with the existing tested radar hardware than a newer but largely untested radar system, because the phase problem had occurred only once during testing.1
- During the Apollo 11 landing, the Apollo Guidance Computer and its on-board flight software averted an abort of the landing on the Moon.3
- The Apollo Guidance Computer first flew in 1966.1
- During Apollo 11's lunar descent, the Apollo Guidance Computer showed a 1202 alarm reading "Executive overflow - NO CORE SETS", followed by a 1201 alarm reading "Executive overflow - NO VAC AREAS".1
- The Apollo 11 computer alarms were not caused by a programming error, pilot error, or a hardware fault.1
1 more fact in events
- The rendezvous radar's spurious cycle steals were caused by the radar being left on standby during the descent, and it had been tracking the orbiting command module.1
By the numbers (3 facts)
Details and parts (89 facts)
- Most of the software on the Apollo Guidance Computer is stored in a special read-only memory known as core rope memory, fashioned by weaving wires through and around magnetic cores.1
- Using a single type of integrated circuit throughout the Apollo Guidance Computer avoided problems that plagued the Minuteman II guidance computer, which mixed diode–transistor logic and diode logic gates.1
- The Apollo Guidance Computer's Sbank, or super-bank, was a 1-bit extension to Fbank, required because the last 4 kilowords of its 36-kiloword ROM could not be reached using Fbank alone.1
- Apollo Guidance Computer extracode instructions were accessed by performing a special type of TC instruction called EXTEND immediately before the instruction.1
- In the Apollo Guidance Computer, the DV instruction treated fixed-point numbers as fractions with a notional decimal point just right of the sign bit, so garbage could result if the divisor was not larger than the dividend.1
- The Apollo Guidance Computer had 20 involuntary counters that functioned as up/down counters or shift registers.1
- Because the Apollo Guidance Computer slept in standby mode, it updated its real time clock by 1.28 seconds each time it woke instead of every 10 ms.1
- The Block II Apollo Guidance Computer used INDEX to address 25 to trigger the RESUME instruction for returning from an interrupt.1
81 more facts in details and parts
- The Apollo Guidance Computer software was designed with priority scheduling, so it automatically recovered from the overflow by deleting lower priority tasks, including the 1668 display task, to complete its critical guidance and control tasks.1
- The two 800 Hz sources were frequency locked but not phase locked, so a random phase offset made the radar antenna appear to be rapidly dithering even though it was completely stationary.1
- The Apollo Guidance Computer was designed to support seven simultaneous programs running, and Aldrin's request was the eighth.3
- Astronauts communicated with the Apollo Guidance Computer using a numeric display and keyboard called the DSKY.1
- The Apollo Guidance Computer used about 2,800 integrated circuit chips in its Block II version, used in the crewed flights, while the Block I version used 4,100 chips.1
- Each integrated circuit chip in the Block I Apollo Guidance Computer contained a single three-input NOR gate.1
- The Apollo Guidance Computer's integrated circuits were implemented using resistor–transistor logic in a flat-pack.1
- The memory word length of the Block II Apollo Guidance Computer was 16 bits, made of 15 bits of data and one odd-parity bit.1
- The user interface to the Apollo Guidance Computer was called the DSKY, standing for display and keyboard.1
- Although the Apollo Guidance Computer stored data internally in metric units, it displayed them as United States customary units.1
- The Apollo Guidance Computer's adder was used to perform all ones' complement arithmetic.1
- At the start of the next instruction, the upper bits of the Apollo Guidance Computer's B register were copied to SQ, and the lower bits were copied to S.1
- The Apollo Guidance Computer's C was not a separate register but the ones' complement of the B register.1
- The Apollo Guidance Computer's instruction format used 3 bits for the opcode and 12 bits for the address.1
- In the Apollo Guidance Computer, angles were kept in single precision, distances and velocities in double precision, and elapsed time in triple precision.1
- The Block II Apollo Guidance Computer delivered the correctly signed remainder of a double-precision division in register L, which considerably simplified the double-precision division subroutine.1
- The Apollo Guidance Computer uses ones' complement notation, so there are two representations of zero: plus zero and minus zero.1
- In the Apollo Guidance Computer, the multiply instruction (MP) used 8 subsequences.1
- In the Apollo Guidance Computer, the multiply instruction was reduced to 3 subsequences in Block II.1
- The Block I Apollo Guidance Computer initially had 12 kilowords of fixed memory, later increased to 24 kilowords.1
- Block II of the Apollo Guidance Computer had 36 kilowords of fixed memory and 2 kilowords of erasable memory.1
- Banks 1 and 2 of the Apollo Guidance Computer were called fixed-fixed memory because they were always available regardless of the Bank register.1
- The memory cycle of the Apollo Guidance Computer took 12 timing pulses (11.72 μs).1
- Each memory word of the Apollo Guidance Computer was protected by a 16th odd parity bit.1
- If a memory word in the Apollo Guidance Computer failed its parity check, a parity alarm panel light was illuminated.1
- The T3Rupt and Dsrupt interrupts of the Apollo Guidance Computer were produced when their counters, driven by a 100 Hz hardware clock, overflowed after many Pinc subsequences.1
- The Uprupt interrupt of the Apollo Guidance Computer was triggered after its counter had shifted 16 bits of uplink data into the computer.1
- In the standby mode of the Apollo Guidance Computer, the AGC slept most of the time and was awakened by an F17 signal from the scaler at 1.28 second intervals.1
- The standby mode of the Apollo Guidance Computer was designed to reduce power by 5–10 W, from 70 W, during midcourse flight when the computer was not needed.1
- The Block II version of the Apollo Guidance Computer expanded its instructions from 11 to 34.1
- The Block II version of the Apollo Guidance Computer is the version that actually flew to the Moon.1
- Block I of the Apollo Guidance Computer was used during the uncrewed Apollo 4 and Apollo 6 flights.1
- Block I of the Apollo Guidance Computer was on board the ill-fated Apollo 1.1
- The Block II Apollo Guidance Computer used INDEX 17 to perform an INHINT instruction that inhibits interrupts.1
- The Block II Apollo Guidance Computer used INDEX 16 to reenable interrupts through RELINT.1
- The Block II Apollo Guidance Computer implemented some instructions by preceding them with a special version of TC called EXTEND.1
- The Block II Apollo Guidance Computer kept the Block I restrictive three-bit op code and 12-bit address despite expanding memory and instructions.1
- In the actual hardware, the rendezvous radar's antenna position was encoded with synchros excited by a different 800 Hz AC source than the one the computer used as its timing reference.1
- The program alarms during the Apollo 11 landing indicated executive overflows, meaning the guidance computer could not complete all its tasks in real time and had to postpone some of them.3
- The Apollo Guidance Computer was installed on board each Apollo command module and Apollo Lunar Module.1
- The Apollo Guidance Computer provided computation and electronic interfaces for guidance, navigation, and control of the spacecraft.1
- The Apollo Guidance Computer was about 1 cubic foot (28 litres) in size.1
- The Apollo Guidance Computer has a 16-bit word length, with 15 data bits and one parity bit.1
- The Apollo Guidance Computer had a small amount of read/write core memory.1
- The Apollo Guidance Computer was the center of the guidance, navigation and control system of the Apollo command module.1
- The integrated circuit chips of the Apollo Guidance Computer came from Fairchild Semiconductor.1
- The Block II Apollo Guidance Computer had 2,048 words of erasable magnetic-core memory.1
- The Block II Apollo Guidance Computer had 36,864 words of read-only core rope memory.1
- Each Moon flight carried two Apollo Guidance Computers, one in the command module and one in the Apollo Lunar Module.1
- The command module had two DSKYs connected to its Apollo Guidance Computer, one on the main instrument panel and one in the lower equipment bay near a sextant.1
- The lunar module had a single DSKY for its Apollo Guidance Computer.1
- A flight director attitude indicator controlled by the Apollo Guidance Computer was located above the DSKY on the commander's console and on the lunar module.1
- The Apollo Guidance Computer's 512 kHz master frequency synchronized external Apollo spacecraft systems.1
- The Apollo Guidance Computer's central registers included an accumulator, a program counter, a remainder and return address register Q, and a lower product register L.1
- The Apollo Guidance Computer had a 12-bit memory address register called S, which holds the lower portion of the memory address.1
- The Apollo Guidance Computer had a 5-bit ROM bank register called Bank or Fbank, used to select the 1-kiloword ROM bank when addressing in the fixed-switchable mode.1
- The Apollo Guidance Computer had a 3-bit RAM bank register called Ebank, used to select the 256-word RAM bank when addressing in the erasable-switchable mode.1
- The Apollo Guidance Computer's 4-bit SQ sequence register held the current instruction.1
- The Apollo Guidance Computer had a 16-bit memory buffer register called G, which held data words moving to and from memory.1
- The Apollo Guidance Computer's B register was a general-purpose buffer register that was also used to pre-fetch the next instruction.1
- The Apollo Guidance Computer had four 16-bit input registers called IN.1
- The Apollo Guidance Computer's Block I had 11 instructions.1
- In the Apollo Guidance Computer, the CCS instruction (count, compare, and skip) is a complex conditional branch instruction.1
- In the Apollo Guidance Computer, the INDEX instruction could add or subtract an index value to the base address specified by the operand of the following instruction.1
- In the Apollo Guidance Computer, instructions were implemented in groups of 12 steps called timing pulses.1
- In the Apollo Guidance Computer, each set of 12 timing pulses was called an instruction subsequence.1
- In the Apollo Guidance Computer, simple instructions such as TC executed in a single subsequence of 12 pulses.1
- In the Apollo Guidance Computer, each timing pulse in a subsequence could trigger up to 5 control pulses.1
- In the Apollo Guidance Computer, control pulses were the signals that did the actual work of an instruction.1
- The Block I Apollo Guidance Computer memory was organized into 1 kiloword banks.1
- In the Apollo Guidance Computer, bank 0 was erasable memory (RAM).1
- In the Apollo Guidance Computer, all banks above bank 0 were fixed memory (ROM).1
- Each instruction of the Apollo Guidance Computer had a 12-bit address field.1
- The Apollo Guidance Computer responded to each interrupt by suspending the current program, executing a short interrupt service routine, and then resuming the interrupted program.1
- The Apollo Guidance Computer had a power-saving mode controlled by a standby allowed switch.1
- The Apollo Guidance Computer had a 16-bit read bus and a 16-bit write bus.1
- The Apollo Guidance Computer's 'Pinball' routines were a set of interrupt-driven user interface routines that provided keyboard and display services for jobs and tasks.1
- The Block II version of the Apollo Guidance Computer increased erasable memory from 1 to 2 kilowords.1
- The Block II version of the Apollo Guidance Computer expanded fixed memory from 24 to 36 kilowords.1
- The Apollo Guidance Computer was manufactured by Raytheon.4
- The Apollo Guidance Computer's accumulator, called A, was used for general computation.1
Reception and legacy (3 facts)
- The Apollo Guidance Computer's performance was comparable to the first generation of home computers from the 1970s, such as the Kenbak-1, Apple II, TRS-80, and Commodore PET.1
- The design principles developed for the Apollo Guidance Computer by the MIT Instrumentation Laboratory, directed in the late 1960s by Charles Draper, became foundational to software engineering.1
- The Apollo Guidance Computer software influenced the design of Skylab, Space Shuttle and early fly-by-wire fighter aircraft systems.1
In their words (1 fact)
- The Apollo Guidance Computer has been called "The fourth astronaut" for its role in helping the three astronauts who relied on it: Neil Armstrong, Buzz Aldrin and Michael Collins.1
Trivia (2 facts)
More facts (1 fact)
- The onboard Apollo Guidance Computer systems were secondary, as NASA conducted primary navigation with mainframe computers in Houston.1
Mentioned on other pages
32 facts about other subjects name Apollo Guidance Computer; the 24 most surprising
- Apollo 5: The Apollo 5 descent-engine burn was aborted after only four seconds because the Apollo Guidance Computer detected the spacecraft was not going as fast as expected.2
- Apollo program: The flight computer design used in both the lunar and command modules was, along with the Polaris and Minuteman missile systems, the driving force behind early research into integrated circuits.6
- CCS: The Apollo Guidance Computer's CCS instruction created CCS-holes when the tested value was known to never be positive, which occurred more often than one might suppose.1
- TS: In the Apollo Guidance Computer, the TS instruction detected and corrected overflows in a way that propagated a carry for multi-precision add and subtract.1
- EDRUPT: The EDRUPT instruction of the Block II Apollo Guidance Computer is a contraction of Ed's Interrupt, named after Ed Smally, the programmer who requested it.1
- Jim Lovell: Lovell accidentally erased some of the Apollo Guidance Computer's memory, which left the inertial measurement unit with data showing the module was in its pre-lift-off orientation, so the unit fired thrusters to 'correct' the module's attitude.15
- Jim Lovell: Jim Lovell took ten minutes to work out the correct orientation numbers, using thrusters to align the stars Rigel and Sirius, and another 15 minutes to enter the corrected data into the computer.15
- Jim Lovell: During Apollo 8, Jim Lovell accidentally erased part of the computer's memory by entering wrong codes into the Apollo Guidance Computer, causing the inertial measurement unit to register the spacecraft in its pre-liftoff orientation.19
- Apollo 9: The Apollo 9 crew studied 37 stars used by the Apollo Guidance Computer at planetariums.20
- Apollo program: NASA adopted MOSFETs in the Interplanetary Monitoring Platform and silicon integrated circuit chips in the Apollo Guidance Computer, enabling the Apollo project.6
- David Scott: David Scott's initial NASA assignment was as an astronaut representative at MIT supervising development of the Apollo Guidance Computer.17
- Apollo program: In the Apollo program, the flight was controlled by the computer rather than by the astronauts flying manually.1
- Apollo: The Apollo project used metal–oxide–semiconductor field-effect transistors (MOSFETs) in the Interplanetary Monitoring Platform and silicon integrated circuit chips in the Apollo Guidance Computer.21
- CCS: The primary purpose of the count in the Apollo Guidance Computer's CCS instruction was to allow an ordinary loop, controlled by a positive counter, to end in a CCS and a TC, equivalent to an IBM 360's BCT.1
- RESUME: In the Apollo Guidance Computer, the RESUME instruction was a special instance of INDEX and was used to return from interrupts.1
- Margaret Hamilton: Details of the Apollo Guidance Computer programs were implemented by a team under the direction of Margaret Hamilton.1
- Buzz Aldrin: On Apollo 11's descent, Buzz Aldrin entered the command 1668 to make the computer periodically calculate and display DELTAH, the difference between radar-sensed altitude and computed altitude.1
- Buzz Aldrin: When Aldrin entered command 1668 again after Houston gave the "GO", another 1202 alarm occurred.1
- Ron Burkey: In 2003, Ron Burkey initiated the Virtual AGC Project, which aimed to recover the Apollo Guidance Computer source code and build a functional emulator.1
- Charles Duke: CAPCOM Charles Duke told the crew from Houston that the 1202 and 1201 alarms were caused by executive overflows in the lunar module guidance computer and were not a concern.18
- Apollo 8: The Apollo 8 crew had to reenter data into the computer to tell it the module's actual orientation after realizing why the computer had changed the attitude.15
- Margaret Hamilton: Margaret Hamilton led the development of the on-board flight software for NASA's Apollo Guidance Computer for the Apollo program.3
- Buzz Aldrin: Software engineer Robert Wills said that Buzz Aldrin entered codes asking the computer to display altitude and other data during the Apollo 11 landing.3
- Margaret Hamilton: Hamilton wrote that the computer was smart enough to recognize it was being asked to perform more tasks than it should, and that it then sent out an alarm.3
Sources
21 pages the facts on this page were read from
- Apollo Guidance Computer en.wikipedia.org
- Apollo 5 en.wikipedia.org
- Margaret Hamilton (software engineer) en.wikipedia.org
- Apollo Lunar Module en.wikipedia.org
- Space Race en.wikipedia.org
- Apollo program en.wikipedia.org
- Apollo command and service module en.wikipedia.org
- Artemis II en.wikipedia.org
- Apollo 17 en.wikipedia.org
- Apollo 10 en.wikipedia.org
- Gus Grissom en.wikipedia.org
- Spaceflight en.wikipedia.org
- Apollo (spacecraft) en.wikipedia.org
- Skylab en.wikipedia.org
- Apollo 8 en.wikipedia.org
- Apollo 7 en.wikipedia.org
- David Scott en.wikipedia.org
- Neil Armstrong en.wikipedia.org
- Jim Lovell en.wikipedia.org
- Apollo 9 en.wikipedia.org
- Apollo 11 en.wikipedia.org
Facts are short sentences the Trivia Zone knowledge graph read from these pages; Wikipedia text is available under CC BY-SA 4.0 and Wikidata under CC0. Names, classes and links come from Wikidata.