Nissan C engine
Motor vehicle engine
The Nissan C engine was derived from the 1.5 L Nissan 1H engine.1 The Nissan C engine was also known as the "Stone engine".2 The Nissan C engine displaced 1.0 L (988 cc) and produced 37 hp (28 kW).1
A summary made of Nissan C engine's own facts, quoted as read; each sentence cites its source.
Connections
0 linked subjects · 16 named together
A link reads subject → relation → subject. Each is stated by a fact (quoted, with its source), taken from Wikidata, or worked out by the knowledge graph's reasoner from the links it was given; inferred links are marked ∴ with the rule behind them.
- stated
- inferred
- named together
Named together
Subjects that share a fact with Nissan C engine, with no typed link between them yet.
- Nissan E engine 3 shared facts
- When its capacity was increased to 1.2 L by raising the stroke from 59 to 71 mm, the engine was called the Nissan E engine.1
- Nissan Bluebird 2 shared facts
- The Nissan C engine was used in the Datsun Bluebird 310 from 1959 to 1963.1
- Nissan H engine 2 shared facts
- Nissan's 1-litre C engine, also known as the Stone engine, was made by shortening the cylinder block of the 1.5-litre B-series engine built in Japan as the 1H engine, on the advice of American engine specialist Donald Stone.2
- Datsun Sports 1 shared fact
- The Nissan C engine was used in the Datsun S211 from 1959 to 1960.1
- Datsun truck 1 shared fact
- The Nissan C engine was used in the Datsun 220/221/222 Truck from 1957 to 1960.1
- Nissan A engine 1 shared fact
- The Nissan C engine was replaced by the Nissan A engine in the 1967 Nissan Sunny B10.1
- BMC B-series engine 1 shared fact
- Nissan's 1-litre C engine, also known as the Stone engine, was made by shortening the cylinder block of the 1.5-litre B-series engine built in Japan as the 1H engine, on the advice of American engine specialist Donald Stone.2
- Datsun 220 1 shared fact
- The Datsun 220 was equipped with the 37 PS Nissan C engine and the 48 PS Nissan E engine.4
- Nissan 1H engine 1 shared fact
- The 1H engine was de-stroked to become the 1.0 L (990 cc) Nissan C engine at the suggestion of former Willys-Overland engineer Donald Stone.3
- S211 1 shared fact
- The S211 was powered by a 988 cc C-series straight-four engine producing 37 PS.5
- Donald Stone 3 shared facts
- The 1H engine was de-stroked to become the 1.0 L (990 cc) Nissan C engine at the suggestion of former Willys-Overland engineer Donald Stone.3
- Carburetor 1 shared fact
- The Nissan C engine was a pushrod engine that used single or dual 26 mm carburetors.1
- Overhead valve engine 1 shared fact
- The Nissan C engine was a pushrod engine that used single or dual 26 mm carburetors.1
- Willys 1 shared fact
- The 1H engine was de-stroked to become the 1.0 L (990 cc) Nissan C engine at the suggestion of former Willys-Overland engineer Donald Stone.3
- A10 unit 1 shared fact
- The 1-litre A10 unit used the same 73 mm × 59 mm bore and stroke as the C engine.1
- Nissan AD Van 1 shared fact
- The Nissan AD Van used the E15S, the E13S, and the CD17 diesel engine.6
Nissan C engine: facts
10 facts in 4 categories · rated most surprising
Making and creation (3 facts)
- The 1H engine was de-stroked to become the 1.0 L (990 cc) Nissan C engine at the suggestion of former Willys-Overland engineer Donald Stone.3
- Nissan's 1-litre C engine, also known as the Stone engine, was made by shortening the cylinder block of the 1.5-litre B-series engine built in Japan as the 1H engine, on the advice of American engine specialist Donald Stone.2
- The Nissan C engine was derived from the 1.5 L Nissan 1H engine.1
By the numbers (1 fact)
- The Nissan C engine displaced 1.0 L (988 cc) and produced 37 hp (28 kW).1
Details and parts (5 facts)
- The Nissan C engine was a pushrod engine that used single or dual 26 mm carburetors.1
- The Nissan C engine was used in the Datsun 220/221/222 Truck from 1957 to 1960.1
- The Nissan C engine was used in the Datsun S211 from 1959 to 1960.1
- The Nissan C engine was used in the Datsun Bluebird 310 from 1959 to 1963.1
- The Nissan C engine was used in the Datsun Bluebird 410 from 1963 to 1964.1
Trivia (1 fact)
- The Nissan C engine was also known as the "Stone engine".2
Mentioned on other pages
8 facts about other subjects name Nissan C engine
- Nissan E engine: When its capacity was increased to 1.2 L by raising the stroke from 59 to 71 mm, the engine was called the Nissan E engine.1
- Nissan A engine: The Nissan C engine was replaced by the Nissan A engine in the 1967 Nissan Sunny B10.1
- A10 unit: The 1-litre A10 unit used the same 73 mm × 59 mm bore and stroke as the C engine.1
- Nissan E engine: The 1-litre Nissan C engine was enlarged to 1.2 litres from 1958 and was then named the Nissan E engine.2
- Nissan AD Van: The Nissan AD Van used the E15S, the E13S, and the CD17 diesel engine.6
- S211: The S211 was powered by a 988 cc C-series straight-four engine producing 37 PS.5
- Nissan E engine: The first E-series engine was essentially an enlargement of the earlier Nissan C engine.7
- Datsun 220: The Datsun 220 was equipped with the 37 PS Nissan C engine and the 48 PS Nissan E engine.4
Sources
7 pages the facts on this page were read from
- Nissan C engine en.wikipedia.org
- BMC B-series engine en.wikipedia.org
- Nissan H engine en.wikipedia.org
- Datsun truck en.wikipedia.org
- Datsun Sports en.wikipedia.org
- Nissan Sunny en.wikipedia.org
- Nissan E engine en.wikipedia.org
Facts are short sentences the Trivia Zone knowledge graph read from these pages; Wikipedia text is available under CC BY-SA 4.0 and Wikidata under CC0. Names, classes and links come from Wikidata.